Search results

  1. Roland69

    Subframe Connectors

  2. Roland69

    What kind of mess has a P.O. left for you?

    My radio harness was cut off to wire a cd player..... thats about all I found wrong with mine. I plan on cutting one out of a junk mustang and soldering and shring tubing it back to normal not a big deal but it kinda ticked me off.... I can't immagine how you felt
  3. Roland69

    Let's talk Oil and etc....

    I use castrol GTX 10W-30 and a NAPA gold filter.
  4. Roland69

    Help with.. This thing (Don't know what it's called)

    you will (or might) need an alignment now....
  5. Roland69

    Oil Capacity?

    just a thought but are you removing BOTH oil drain plugs. there is one on both sides of the cross member
  6. Roland69

    freeze/core plug replacement IN CAR! need some help

    don't use one of them expanding plugs please.... if the hole is 1 5/8 buy some 1 5/8 plugs (just an example may be different size than that) getting the old one out is the PITA like you said but the new one goes in alot easier. Make sure the hole in the block is clean maby sand it a little if...
  7. Roland69

    ball joint question

    I have installed the "cheap line Ball Joints" on a car and the next day (not even lying) they were worn and loose. needless to say we replaces them with the good line Moog's
  8. Roland69

    Aftermarket headers, mounting dipstick?

    oh and I also have the CD lol.
  9. Roland69

    Aftermarket headers, mounting dipstick?

    I have every season on DVD's (got a friend who made them)..
  10. Roland69

    Help with.. This thing (Don't know what it's called)

    caster camber plates...
  11. Roland69

    Write up for rebuilding a T-5?

    http://www.fordmuscle.com/archives/2005/12/T5Rebuild/index.php
  12. Roland69

    Aftermarket headers, mounting dipstick?

    85 SS... like the new avatar lol. Ever watched that show
  13. Roland69

    Help with Tune-Up

    1) Spark Plugs/ Sparkplug Wires....autolite #25 with 0.54 gap (IIRC) 2) Cap and Rotor (I run MSD for the look and function) 3) Fuel Filter (good idea) 4) PCV Valve (another good idea or atleast check) 5) Timing to 10 degrees (could probly bump to 13-14 deg with 91 octane or so) 6)...
  14. Roland69

    Need Help - Broken Oil Pan Bolt

    weld a nut to it and let it cool (fill the whole center of the nut with weld)....wiggle it back and forth and turn it out like normal.
  15. Roland69

    Headers for Stock 5.0

    I used some BBK part # BBK1515 and like them. I cleaned the port openings on mine with a die grinder to remove alot of excess weld. I only bought them because I heard alot of good about BBK and my stock headers were starting to leak from the collectors rotting away
  16. Roland69

    1987 mustang GT oxfordwhite/sand beige interior

    if I would of known I would have got all of it and gladly traded for a black interior. I have been wanting black since I got my car
  17. Roland69

    front alignment/scrub issues

    half a deg is a fair bit..... IMO. I would want the camber as close as possible if not the same on both sides. when I do alignments I like to see them within 0.05 degree.
  18. Roland69

    1987 mustang GT oxfordwhite/sand beige interior

    there is a 4 cyl in my local yard with a tan int in decent shape.... I thought it was rare but never thought much of it. I wouldn't be surprised if the car was crushed by now
  19. Roland69

    Front poly control arms bushings worth it?

    never done mustang front control arms but I have done a few older chevy cars. I put the torch to the old bushings and leave them outside to burn for maby 20 minutes. clean them up after the rubber is burnt out and press the new ones in with lube.
  20. Roland69

    first time doing headers

    I did new plugs when I did my headers...
Top Bottom
Back
Forums
Menu