Search results

  1. superstang01

    Sway Bar Opinions

    I was just about to start a thread similar to this. Now I don't need to lol
  2. superstang01

    Lets Play A Guessing Game

    525rwhp I made 425 on only 10-11 but using 94 octane This engine should really move some air with the stage 3 heads and 16lbs of boost. Why didn't you upgrade the cams??
  3. superstang01

    Lightning Supercharger On 5.4 Dohc

    I think that is a lot of work for a lightning supercharger. So much fab work to build an intake manifold. I would think it would be easier to fab up a turbo kit?
  4. superstang01

    My Car Must Have A Bigger Engine Than A 4.6l

    your car is a SOHC 4.6...... your mechanics are dumb and so is your book. 1995 was the last year for the pushrod 5l in a mustang. No matter what you say, you are wrong
  5. superstang01

    99 Vortech V2 Gt Problems.

    Get it tuned. Not much else you can do really... My tune was 400$....an I was at the dyno 2 times. You are getting gouged hard
  6. superstang01

    Another

    your stock pump will definitely max out. The injectors will work, however, they are EV6 injectors ad GT injectors are EV1 so you will need EV6 - EV1 adapters in order for them to work
  7. superstang01

    New Clutch On The Way

    That's just assuming you go 26 spline input shaft if you do a rebuild, our clutches are only 10 spline. I had a slide hammer for my pilot bearing too....it didn't budge it lol. Mine came out in about 6 pieces. Hopefull yours comes out easier than mine. The input shaft of the tranny was even...
  8. superstang01

    New Clutch On The Way

    I run a ram hdx with a stock machined flywheel. Your set up is probably going to be a bit overkill since that will hold more than the tranny is rated and if you ever need a rebuild you wont be able to reuse any of it from my understanding. But as long as it feels good that's all that matters. My...
  9. superstang01

    Roush Supercharger Onto A 2000 Mustang Gt?

    The manifold on the roush might be made for Romeo heads. Since your car is a 2000, it is most likely Windsor heads. I think some 2000s might be romeo heads though, but im pretty sure that would be rare. Count the bolts on your valve covers, if you have 11 bolts, you have romeo heads!
  10. superstang01

    Duraflex Wide Body Kit Front Fenders

    you shoulda bought a cavalier
  11. superstang01

    Buying A Used 94-04 Mustang And Fixing It Up Cheap, My Diy Experience

    seems like a lot of work for a v6
  12. superstang01

    Motor Set Up In A 02 Gt???

    This. Do this! I think I've seen mmr offering rotating assemblies for as low as 1700$ and use your stock heads with some good cams and a supercharger. Would be easy to see 450rwhp
  13. superstang01

    Got The Car Dyno'd Today

    STD. This was in 83f temps with 55% humidity What is the difference in the corrections? I feel like learning something new lol
  14. superstang01

    Got The Car Dyno'd Today

    Is it just me or do those number seem a little low? My car made 405rwhp at 5500 running out of fuel at about 10 psi With 11 psi my car easily made 425rwhp and 444rwtq and my car is tuned very safe. This is also on a dynojet.
  15. superstang01

    Sn95 Downtown Los Angeles Photoshoot *epic*

    amazing is all I can say
  16. superstang01

    Sn95 Irs Polished Exhaust Photoshoot

    winter project in SoCal? I didn't think you got a winter there lol Looks amazing!!
  17. superstang01

    Sick Of Being Made Fun Of With My V6

    too much work with a 351.....find a wrecked gt/mach 1/cobra and do a complete swap
  18. superstang01

    2003 Sonic Blue Cobra For Sale

    dont get me wrong, it is a nicely modded car!
  19. superstang01

    2003 Sonic Blue Cobra For Sale

    that wing kinda ruins it for me
  20. superstang01

    2003 Sonic Blue Cobra For Sale

    for sale section is where this should be!
Top Bottom
Back
Forums
Menu