Search results

  1. 95snoozer

    Exhaust from one tailpipe smells of coolant.

    pull all the plugs before you drive it again. You are looking for the head gasket culprit.
  2. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    BTW, I love magnapacks and that bassani header setup on 4.6 it sounds so good. 5.0 its just not a good as good as it does on ALL 4.6s. SPintechs pros and Bassani real streets with removable baffles have to be the sweetest and one of the loudest sounds there is out there. check out...
  3. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    removing egr does not effect "performance" whatsoever. How would adding hot exhaust fumes into the intake tract with a hole on the outside of a radius which creates turbulent air possibly be beneficial to "performance?" if you live in a COLD climate, it can effect your morning experience...
  4. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    thats what I ran Tokicos are fine, MM sells them in their kits. I have been in a bilstein H&R car and it was awesome. I have been in a bilstein stock spring car with full length subframes and it was FAR better than my my stock car with H&Rs and sways. These were each roomates of mine so I...
  5. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    even stock springs will have valve float... Strange Engineering complete coilover package – fronts I would not run these on a daily driver, been there done that. Is it really any worse than 2 inch lowering springs and sport shocks? I have H&R race springs with Koni adjustables on my BMW right...
  6. 95snoozer

    Whats gears should I go with ?

    I would run a 3.90s or 4.10 gear in all N/a 302s if given an option. If it was a serious H/C 302 that spun to 6500. I would have 4.30s I had 3.73s in mine and it always needed 4.10s, whether it had stock heads or the gt40p setup, it would have been faster. Its laughable that anyone would say...
  7. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    looks like my sig is incomplete "stage 1" gt40Ps proper valve springs xe270hr cam 1.7s pullies Stock fox TB swap (go with whatever you want 65-75) Prom 77 mm maf 24s Fox MAC LTs Prochamber spintech mufflers Professional products Typhoon (I would run a port matched cobra or a performer) adj fpr...
  8. 95snoozer

    Engine 95 Gt 5.0ho Build-up

    gt40P combo in Sig I would say, just follow my combo. I did the equivalent to a stage 1 (mostly bowl work and ground down exhaust bumps in my kitchen) GET PROPER SPRINGS for your head. I would not spend all that money on the bassani headers, nor woudl I run magnapacks on a 5.0. My idea...
  9. 95snoozer

    advice needed, my top end build

    with a proper cam, injectors maf and tune, I would not be surprised to see the setup make 320-345 hp and 320-335 tq. Those are some mean heads and intake that you have and it could be a very fast heads cam car.
  10. 95snoozer

    advice needed, my top end build

    you may be able to squeeze out 260ish on those stock injectors, but it will be dangerously lean and will be overtaxing the injectors. do NOT be surprised if this thing makes 240 HP. These are the MAJOR problems with this setup. with 24 # injectors Depending on the tune, you could make as...
  11. 95snoozer

    best upgrades

    check that balancer with your fingers ASAP. shaking can also just be engine mounts as well or a plenum gasket leak. I wouldnt go spec on my personal clutch. I really have never liked the feel of them You can go wrong with the feel and launch capabilities of a king cobra or a good ole...
  12. 95snoozer

    95 5.0 running pretty hot

    My mustang always had heating issues in Texas heat. The problem is the crappy stock radiator. I ran with manual fan switch as well but it still couldn't always keep up in stop and go traffic with a/c on. One day on a road trip, my radiator let go. I ordered the Summit universal radiator...
  13. 95snoozer

    trickflow efi street burner intake manifold hp gain?

    Good. 0-5500 Intake, headers, orh, Exhaust pullies, gears, 1.7s timing at 14 with premium. A proper tuneup and maybe check the a/f on a cheap dyno day. These is not much more that will actually improve a stock head cam 5.0 I would not spend money on a cam with stock heads. You will make...
  14. 95snoozer

    94 GT pinging, help please

    I may have a guy in Seattle that will tell you it's not detonation. I'll check.
  15. 95snoozer

    H&R Race Spring performance

    I never said super sports. I implied NOT to get them. I keep saying to get Sports! I think it fits exactly what you are looking for. Sports are lower than race and higher than SSs. They will be the beat riding. You also aren't goingvto have the best sry racing experience with billsteins...
  16. 95snoozer

    H&R Race Spring performance

    I too had coilovers prior to the H&R SS and was extremely happy to get rid of the "clank", "buuung", "clunk" sounds during everyday driving the coilovers cause.
  17. 95snoozer

    H&R Race Spring performance

    Its great that you have those parts already Cornercarvers is just the name of the site. They are experts on mustang suspension tuning. I would not run the Race springs. the spring rates are very high and you will not have any weight transfer at all at the track. I did run the SSs and it...
  18. 95snoozer

    trickflow efi street burner intake manifold hp gain?

    leave the stock injectors until you make over 245 rwhp. It will run like crap with 30s. Save them for when you have serious heads cam, or return/sell them. everything else will be fine. you can see the sig for what mine did with a stock Fox TB. Intake will make a nice difference.
  19. 95snoozer

    Longtube Headers?

    No it wont, and his stock cam/head auto will not be able to take advantage of any flow gains and COULD be hurt by it SLIGHLTY. not it does NOT. Not on a stock headed mustang which is only revving top 5400 You should read a few articles before changing. 1 3/4 shorties actually will beat...
  20. 95snoozer

    94 GT pinging, help please

    I don't think you are pinging. I think you are hearing simple valve chatter in the exhaust because you are bogging it. Install 4.10s and gt back to us. You can also run a spout connector out test.
Top Bottom
Back
Forums
Menu