Search results

  1. Last5.0

    28oz SN95 damper ?

    The damper (balancer) is the same from Fox and SN95, but the fox has a deeper crank pulley that bolts to it. The model # of the SFI balancer I have on my '95 is the same model # for a fox.
  2. Last5.0

    Skirtless

    Nice. Remind me not to ever buy anything from you...lol
  3. Last5.0

    What size MT ET streets fit on 15 x 10 prostars?

    DOH!! Didn't pay attention to the date...lol
  4. Last5.0

    Fog Light HELP!!!!!

    Fuse box diagrams can also be found in the owners manual
  5. Last5.0

    What size MT ET streets fit on 15 x 10 prostars?

    I run 26(or 27, can't remember)x11.5 ET streets on one car and the same size Hoosier Quick Time Pro on the other. The QTP's seem to be wider than the ET's even though they are the same size.
  6. Last5.0

    95 GT Vert T5 3.08s to 3.55s?

    Lol, I'm currently just the opposite. 3.55's are great with a stock geared tranny, but since I switched to a TKO600 with the 2.87 first gear it doesn't have as much umph off the line and want to switch to 3.73
  7. Last5.0

    Suggestions on Fuel Pump for 331 Stroker Motor

    I still run the stock pressure regulator. If it's still working and doesn't leak then no reason to replace it.
  8. Last5.0

    1995 GT dyno numbers

    No way with stock E7 heads and only the mods listed. I think it's a typo or all the mods didn't get listed. Notice the ones listed below it have about the same HP and TQ but also list Edelbrock heads and Crane cam.
  9. Last5.0

    Suggestions on Fuel Pump for 331 Stroker Motor

    If planning on going with a supercharger down the road, get the model GSS340 pump which is a high pressure pump. With the return style fuel system, unused fuel gets returned to the tank. It won't hurt anything now and will be beneficial when boosted.
  10. Last5.0

    Suggestions on Fuel Pump for 331 Stroker Motor

    Just go with a Walbro 255lph. The kit can be found for about $100. I've been hearing good things lately about HFP (High Flow Performance) pumps. Supposed to be the same as Walbro but cost about $79 for a kit.
  11. Last5.0

    How tight should the rear shock upper insulator bushing be?

    guess it depends on the brand/model of shock
  12. Last5.0

    How tight should the rear shock upper insulator bushing be?

    nope, just hold the upper part of the shock tube with your hand. Most shocks have that tube attached to the shaft. Now struts (like on the front of the car) on the other hand don't and it won't help, the shaft will still spin.
  13. Last5.0

    How tight should the rear shock upper insulator bushing be?

    Have someone hold it from underneath
  14. Last5.0

    How tight should the rear shock upper insulator bushing be?

    Torque spec is 25-34 Lb-Ft It will squish to about the same diameter as the washer. It will look like less than the first pic but more than the second.
  15. Last5.0

    Lower Intake Manifold Gasket Question

    The what? :shrug:
  16. Last5.0

    94 Cobra clutch cable problems

    +1 I've seen many route the cable wrong and have this problem when installing a new cable.
  17. Last5.0

    Lower Intake Manifold Gasket Question

    The factory uses the rubber pieces. When I first swapped intakes years ago I used no rubber pieces and used a bead of Right Stuff. It worked good but was a pain to clean off when I removed intake. I then used the rubber pieces with some tack n seal on the bottoms to help hold them on and I...
  18. Last5.0

    Wingless SN95's

    Yeah, it makes it look shorter. I pulled mine off temporarily back in '04 for a couple days but ended up putting it back on.
  19. Last5.0

    Installed the MGW Shifter tonight!

    I had a B&M Ripper on my T5 for years and liked it. I only switched because I swapped to a TKO600 and the shifter from the T5 doesn't fit the TKO's. I had to get a new shifter and with the TKO swap it's positioned 5/8" more forward than a stock shifter and the MGW allowed me to position/rotate...
  20. Last5.0

    SN95 Alternator Bracket

    Install a Vortech supecharger that relocates the alternator a bit and not have to worry about it...lol
Top Bottom
Back
Forums
Menu