Search results

  1. TOOLOW91

    TTSaleen's Foxbody Project

    Bad ass car ! Saleen is on my bucket list
  2. TOOLOW91

    Cracked plenum

    It cracked because of the spacer under it. The spacer is softer then the Intake just mated to the lower. So a lot of people including myself many moons ago over tighten and the ear cracks because it actually crushes the spacer enough to flex it.
  3. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    Put it in a vice and try to roll the pad down a little with some force A little fuel leak while testing after Isn’t going to cause some instant fire all you’d have to do is prime the pump a few times before you start it to check for leaks. I posted pictures from an old thread in here where a...
  4. TOOLOW91

    Progress Thread Diagnosis front end clunk (and more)

    Remflex is the only gasket I will use period
  5. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    I think a tweak in that mounting pad and what you have will fit fine
  6. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    This guy did what I said - they said they cut the plate I guess for a relief and then bent the plate down and it fit
  7. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    You can either grind into that upper some - or tweak that fuel line regulator pad down some with a BFH
  8. TOOLOW91

    Progress Thread Diagnosis front end clunk (and more)

    Absolutely, there’s a few others as well but for what you’re doing it’s a good head
  9. TOOLOW91

    Progress Thread Diagnosis front end clunk (and more)

    They are a 165 that’s makes sense. Usually when I hear renegade it’s usually the 220s that’s why I mentioned it.
  10. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    That’s the dedicated line to the map sensor
  11. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    Big one feeds the tree to send vaccum to everything - HVAC / Boost gauge/ meth controller Dedicated line to map sensor for the Holley ( I have had Holley efi on this car since 2017 or 18) Other one goes to the regulator / Blow off valve
  12. TOOLOW91

    Progress Thread Diagnosis front end clunk (and more)

    The thicker deck should seal much better and stay flat. 8 psi doesn’t call for a cometic head gasket at all, so I’m glad you went with the 9333pt1. I think you’ll be in much better shape this time around. Stock pistons ? Or do they have bigger reliefs or fly cut ? With a renegade head you...
  13. TOOLOW91

    Progress Thread Diagnosis front end clunk (and more)

    How much boost does it make ? The highlighted cylinder definitely shows some carbon tracing from cylinder leakage. But not the end of the world per say What went on with cylinder 5 ? You have an even amount of copper spray everywhere but there is some big clean or transfer spots like it was...
  14. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    I have regular rubber vaccum hose from the parts store. Runs from the back fitting around my intake to my strut tower to my regulator. Just ts off to the blow off valve as well.
  15. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    I would go this route if it’ll work rather than the whole rail setup .
  16. TOOLOW91

    Trick Flow Series R to Box R Upper Intake Road Block

    Being you have an r already , I think you’re going to pick up hp with the upper only in the way higher rpm range and I’m not sure the juice is worth the squeeze
  17. TOOLOW91

    Just Bought A Procharger D1 Help Please

    No . The 42s are big maybe but I wouldn’t. 255 isn’t cutting it at 5-550 at the tire boosted either A guy 3 posts into your linked thread did it and said “ at 5500 the fuel pressure leveled off and he was tapped out. “ You do not want that. Regardless of if he made over 500 already. One bad...
  18. TOOLOW91

    Just Bought A Procharger D1 Help Please

    Knowing what I know now vs 2016 - 600 wheel id rather see you run 60 or 80lb injectors over 42 at that power. Minimum 60s
  19. TOOLOW91

    Build Thread My Never Ending 89 Notch Thread

    Nice little 75 mile cruise today. Weather started off iffy and then got really nice.
  20. TOOLOW91

    Build Thread My Never Ending 89 Notch Thread

    We’re back ! Took it for a ride and this thing is still pretty quick :p
Top Bottom
Back
Forums
Menu