Search results

  1. Matt90GT

    Is $400 fair for a 5-lug conversion kit ready for all rims?

    Any rim? BS Any 9" rim will stick so far out it is not funny! Plus have rubbing issues like mad. Do it right, you dont want the liability of spacers and studs breaking.
  2. Matt90GT

    speedo recal with 16"rims...

    Wheel size dont matter!!!!!!!!!!!!!!!!!!!!!!! you could have a 24" rim and still have the right calibration as long as the tire height is the same or with in a few %
  3. Matt90GT

    bullit wheels on 87 mustang w/lug conversion fitment question?

    hmmmmmmm, SPACERS Bad idea. Do it right the first time with the Sn95 parts. YOu get better brakes, suspension and NO MORE WARPING ROTORS! Plus you can fit any of the Sn95 wheels!!!
  4. Matt90GT

    347 power problem

    You can run stock heads and intake on a 347. Ford did it with the 351s. That is not the problem. Seriously look into the MAF first. Did you get the right sampling tube installed?
  5. Matt90GT

    bullit wheels on 87 mustang w/lug conversion fitment question?

    You dont have a CLUE what you are talking about. The cobra 98+ do NOT work. Niether does the 96+ 17" GT wheels. The 95 R is one of the VERY few OEM wheels that do work on the lincoln rotors. Do some research before typing next time.
  6. Matt90GT

    347 power problem

    Vacuum will usually show up as a bad idle + you could have a stiffer brake pedal. Most likely it is in the MAF sensor. Try turning that about 30* to see if it helps. Also is the fuel with or w/o vaccum?
  7. Matt90GT

    5 lug conversion kit from 50resto

    Works, but any of the 96+ GT 17" wheels and 98+ 17"-18" cobra wheels dont work with the front rotors.
  8. Matt90GT

    ranger 5 lug spindles

    For the 4cyl models yes, but limits your wheel selection plus your brakes still suck. http://svo73mm.cjb.net
  9. Matt90GT

    bullit wheels on 87 mustang w/lug conversion fitment question?

    no, you need the SN95 parts
  10. Matt90GT

    93 Mustang fenders on a 89 Mustang, do they fit ok?

    They have a larger wheel well opening. You have to get the inner fenders also with the outers. Bolt up fine on the LX models. The GT also require the lower spats from the 91-93 cars.
  11. Matt90GT

    2000 Roush Brakes on an 83' fox

    Which brake calipers you talking? If they are the 4 or 6 pot calipers the bullits will NOT clear.
  12. Matt90GT

    Fox Body - 5 Lug - 17x9+ wheels

    factory is 17x9 only on the 03 cobras. You have to keep the stock track front and rear since those wheels only come in one offset.
  13. Matt90GT

    help with brakes, piston wont compress

    FYI, any caliper with a built in parking brake will require you to turn the piston as you compress it to defeat the self adjusting clutches inside the piston.
  14. Matt90GT

    Lincoln rotors and later Mustang rims OK!!!

    Use spacers.... Bad idea!
  15. Matt90GT

    Will 1.7 rockers work

    They work on the TFS stage 1 cam. the lift is just shy of the stage 2 numbers. Always check clearance, but the biggest limiting factor is the valve springs.
  16. Matt90GT

    Ft Coilover on stock strut mounts?

    What is the problem here? You obviously dont know anything about coilovers with a reply like your last one. The springs control the ride height. Stock they are resting on the top of the K member. With coilovers, on the bottom of the CCs. If you remove the stock springs, you are now moving...
  17. Matt90GT

    5.0 Truck Heads??

    86-96 302 and 351s used the E7TE. See the E7 signifies 1987 and TE is truck engine. That is where the mustang heads came from on the GTs of 87-95 -- the truck parts bins! Only the lightning got the GT40 heads and the first year Explorer V8s. Then the 96.5+ got the GT40P heads.
  18. Matt90GT

    Brake booster and Caliper?

    Install at least the 99+ GT PBR calipers. FYI on the brake booster, the bolt spacing is different on the sn95 boosters than the 79-93 fox cars! Also the Sn95 use a smaller metric stud vs the previous SAE threaded beast. Since the bolt spacing is different, that is why you need to...
  19. Matt90GT

    Mastercylinder confusion 79-86 to 87-93

    yeah and it only works on the 87-93 cars Bottom line, you dont use the 87-93 GT/LX master cylinders. For the 79-86 cars, use the 1" towncar from a 85 model year. adapt as needed
  20. Matt90GT

    IRS/Live Axle Swap

    That year will NOT work. You need a 99+ rear axle. Reason, the mounting bolts in the control arms are 12mm for the 79-98 and 14mm for the 99+ cars. Plus the width issues. Get a 99+ axle
Top Bottom
Back
Forums
Menu