Search results

  1. reeber

    What drag radials for a 17x8 wheel?

    I have the 275/40/17 BFG's and they gave me a best 1.817 60' time... I am trying the MT's next.. .
  2. reeber

    need SC help!!!

    I'll bet that you blew a hose off the intake... Listen for a significant "air" sound... If you hear that, then you have a major vacuum leak... Just find the hose that popped off, reattach and put either hose clamps, or zip ties on that sucker...
  3. reeber

    how much spray can the plastic intake take?

    If you guys are worried about air pressure destroying the stock intake, my PI intake has (so far) handled up to 16 lbs. of PSI through my S-Trim... So far...
  4. reeber

    eibach sportline lowering kit...

    I am more than happy with my eibach Pro-kit... Springs are still progressive rate which gives the car a great ride and with my long tubes, there is still enough clearance for "small" speed bumps... I don't think I could lower the car any more without having bottoming-out issues...
  5. reeber

    How do you adjust the door so that it lines up with the body

    once I put the subframe connectors on my car, it corrected a lot of the problems you guys are having.. I don't even have to push my door closed, the striker meets the door hinge perfectly on both sides...
  6. reeber

    How required are C/C plates?

    I am having mine installed tomorrow... I got the chrome MM plates... I am building my front in stages... I'll put the plates on, the get the control arm's / coil over kit.. Then finally do the K-member as I get the money together..
  7. reeber

    How do you align the front wheels of the car

    Once I put on the CC plates when they come in, and I take it to the alignment shop. What tools do the "specialists" use and what specifically do they do to align the car correctly and as "perfectly" as they can?
  8. reeber

    cc plates ?

    Now... to find someone that knows how to perform good alignment..
  9. reeber

    cc plates ?

    is that a joke, or serious? What's different in handling? What's noticeable?
  10. reeber

    Who removed thier strut tower brace

    And when is it safe to do so?? I am told that once you have a roll cage in the car, then you don't need it... It is a pain in the ass when working on the engine. It gets in the way of my blower discharge tube.. I want to get rid of mine, but I don't want to sacrifice performance, or make the...
  11. reeber

    cc plates ?

    I just ordered my chrome ones today! Can't wait to see them on the car... Do they make any noticeable handling difference?
  12. reeber

    can you guys explain to me the deal with reverse rotation (RR) centri blowers?

    What about the T trim??? I am in the process of upgrading my S...
  13. reeber

    HIDs ON! Fog lights off??

    Did you disconnect the battery when you installed it and allow the computer to reset?
  14. reeber

    Headlights don't put out much light?

    I've had the two piece projectors... They cracked... Got the new style projectors, you couldn't adjust the light by the way they are one-piece that fit into our cars. So, they pointed pretty much straight down. Now I have the Black Beauty's and the driver's side has all kinds of moisture build...
  15. reeber

    Piece of crap headlight!

    How to get moisture out of the inside of my headlight?! This is my third set and have no clue why it keeps filling up with moisture! I took the bulb out and let it sit overnight. It will dry, but fog right up again when I put the bulb back in it. Any advice? I have the Black Beauty's... From...
  16. reeber

    How do I remove the side mirror?

    Not sure if your car is different than my '96, but if you have the Mach system, then you have to remove the speaker grill, then the speaker, and the three nuts should be right there and accessable. I didn't have the Mach system, so I just have a plate that pops off and the nuts are right behind...
  17. reeber

    diablo chip

    Well... For starters, you need a tuner. Or, you should by the chip from someone who's tuned your exact same setup and have them load that tune on your car. There is no way to tell how much you gain from the new chip. Do you have any more than exhaust and air filter done as mods? The chip...
  18. reeber

    Which Intake????

    Hey!! How are you?! Anyway, I'll probably go with the Bullit intake. Dave likes it too.. Don't you have that on your car? Don't you have a similar setup to mine? I just wanted to compare prices, knowing that I have to replace a lot when going with the bullit intake (i.e. alternator...
  19. reeber

    Which Intake????

    I was told that I would have a real hard time fitting the reichard intake under my stock hood... Do I need to lose my strut tower brace?
  20. reeber

    Which Intake????

    I have the S-Trim with a built motor also... running about 15 PSI... PI heads with bee hives, accufab 70MM TB. I am cammed as well... My conservative tune is documented in my sig...
Top Bottom
Back
Forums
Menu