Search results

  1. nickyb

    Front brakes not releasing

    Also check that the calipers slide on the pins freely,they maybe hanging up
  2. nickyb

    Grown Man Crying

    Pete, forget the pivot concentrate on the adjustment.
  3. nickyb

    One for the books

    Agree noobs, check power to all going in and out to motors. That ivy tech should have done this but he was in a rush for another kegger.
  4. nickyb

    Front brakes not releasing

    When you bleed the calipers how was the flow? Could be kinked/clogged line.
  5. nickyb

    Electrical Parasitic Draw, Fuse 8

    To check draw use multimeter hooked up to battery by taking negative terminal off and connecting either multimeter probe to one side and the other to the other side. ( one to battery and one to the terminal .
  6. nickyb

    Grown Man Crying

    Pete can you have someone push the clutch in all the way and you go under and see if the fork moved all the way ? Maybe just a cable adjustment.
  7. nickyb

    Grown Man Crying

    Pete,how hard is it to push the clutch in? Is it the same as before? Try rolling the car back and forward while putting it in gear.
  8. nickyb

    Ford 460 swap

    I was talking about overall timeline, I never have enough money to do everything at once and also do things as I can afford them. Looking forward to pics of progress, rock on.
  9. nickyb

    Ford 460 swap

    So about three years together to stage three?
  10. nickyb

    Fox Removing smog only questions

    Fit and finish was great with my BBK headers and SLP loudmouth cat back. No leaks.
  11. nickyb

    Fox Removing smog only questions

    I've had the BBK.Catted xpipe for years now ,no complaints, passes smog every year.
  12. nickyb

    Engine 302 oil leak when in gear but fine at idle

    Have someone start the car with you looking at the drivers side for the leak. P.s. have a fire extinguisher on stand by.
  13. nickyb

    Grown Man Crying

    Pete I put BBK mid catted xpipe on my daily and I pass smog here in Nevada(aka surface of the sun). No smell in my garage. But I warn you of sticker shock$$.
  14. nickyb

    New Exhaust for 408w stroker

    SLP mufflers come in 3inch, I have the 2 1\2 resonates and I love them. I also had flow 40's on before.
  15. nickyb

    Suspension Foxbody mustang Steering shaft issue

    What did I'm say?
  16. nickyb

    Mustang5L5’s progress thread - Rear window fun

    Sell the r12$$$ and get some ES12A( you will need 134a fittings) .I've run it in my 93 for about six years now and I can definitely say it works as good as the r12 and better then134a. First 110 degree day with it in my93 , after sitting outside , after work I turned it on and drove for five...
  17. nickyb

    Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned

    Foxes ain't even got no idiot light for that
  18. nickyb

    Fox Full set of seats in the back of a hatch

    You could always tie the hatch down.
  19. nickyb

    3.08 gears with a manual trans

    I"had" a 72 Monte for ten years as my daily.
  20. nickyb

    3.08 gears with a manual trans

    I set up My 72 Monte Carlo with 411 gears in a twelve bolt with moroso.carrier and Moser axles. The 700 r4 with lock up.converter made it a daily driver( for me anyway)
Top Bottom
Back
Forums
Menu