Search results

  1. JoeDaddy

    Post pics of how your foxbody currently sits

    The drone has the best camera on it that I own :rlaugh: A couple of pictures from near my house. Probably up about 200' or so.
  2. JoeDaddy

    2018 Mustang Specs Revealed

    I just last week picked up a 2017 401A with the preformance package for about 38,000 (Before taxes) This is pretty much the same car, 2018 style. If you want all the fun new stuff, like the 10 speed trans, active exhaust, and fancy new suspension.... :shrug: I'm not saying its a bad...
  3. JoeDaddy

    2018 Mustang Specs Revealed

    http://shop.ford.com/build/mustang/2018/#/select/ :nice: (too much!!)
  4. JoeDaddy

    Uncomfortable Seating Position.

    Silly question, did you know the headrests ratchet? I'm with I bleed Ford Blue. I picked up my 2017 PP last thursday, and have put about 700 miles on it so far, and I LOVE the seats. They are lightyears ahead of the seats in my fox!
  5. JoeDaddy

    What Have You Done To Your S550 Today?

    Photo shoot!
  6. JoeDaddy

    Post pics of how your foxbody currently sits

    Drone photo shoot tonight! Plus some new shirts!!
  7. JoeDaddy

    Post pics of how your foxbody currently sits

    Blue 1 and Blue 2
  8. JoeDaddy

    Wrap That Thing!

    On my way to work monday moring at 4am, I came across a racoon that had decided he had had enough of this world. Of course, he picked the side that had been previously damaged and repaired. I did a quick "bandaid" job on it to make it more presentable until I can find a replacement bumper...
  9. JoeDaddy

    Post pics of how your foxbody currently sits

    racoon :nonono::fuss:
  10. JoeDaddy

    Wrap That Thing!

    Maybe i misunderstand? If your saying they did the hatch / bumper all as one peice when they put it on, they still had to cut it? In that case, i did one peice at a time because i was less likely to screw up a small peice vs a bigger one.
  11. JoeDaddy

    Wrap That Thing!

    Cost?? This car is a 10 foooter at best. I could have used a 5' wide x (im guessing) 6' long piece to do the hatch. Instead i used about 5' x 2 1/2' of vinyl to do the whole hatch. Bumpers would have been much more waste doing them in one peice too. Piecing it together probably saved about 1/2...
  12. JoeDaddy

    Boost, With Or Without Ethanol?

    I buy the non ethanol gas for my small engines. I burned up a chain saw with regular gas "with up to 10% ethanol" The small engine guy told me to get the pure gas for anything that was 2 stroke. Now, I do that, and I use it for anything smaller then a car (Lawnmowers, etc..) :shrug:
  13. JoeDaddy

    Post Your High-tech Toys And Wish List

    Not the colors I would have picked, but the customer is always right... right?
  14. JoeDaddy

    Post Your High-tech Toys And Wish List

    Here's more info on the machine I used to make the mustang silhouette signs. It's just a simple rotary engraver. I was using it today to make some new badges for a customer that is restoring an old camper, and I'll kind of run thru the process. Here is what they need new of. It doesn't have to...
  15. JoeDaddy

    Post Your High-tech Toys And Wish List

    Noobz, I didn't forget about you! I've got my kids this week, so between work and kids, anything extra simply does not get done. It will be a struggle to fit in mowing the lawn. But....... Here is the newest toy at my disposal.:D
  16. JoeDaddy

    Wrap That Thing!

    The majority of these are on the aluminum board, and the contour cut ones were cut out with a jigsaw. They were printed out using our wide format printer, that is capable of printing up to 60"
  17. JoeDaddy

    Wrap That Thing!

    I'm not exactly sure what units it is in. The Z was zeroed where the cutter was just touching the substrate, and that was probably its second of three passes. The board I was using in the picture us 1/4 solid plastic. It's nice for garage signs, as it's light, and it has a really nice edge when...
  18. JoeDaddy

    Wrap That Thing!

    That is our engraver at work. Its a smallish one, and can engrave a substrate up to 12" x 24" x about 2" probably (thickest stuff I've ever cut with it was 1"). If I wanted to do anything larger than 12 x 24, I'd have to do several pieces and put them together. I'll throw some pictures up in...
  19. JoeDaddy

    Expired Crap For Your Walls

    Moar crap!!
  20. JoeDaddy

    Expired Wanted 2.73 For 7.5 Rear 79/93

    Where are you located? I have a 7.5 that i need to be not in my life anymore! What i got :
Top Bottom
Back
Forums
Menu