drag race

  1. Tubes

    Need Help With Timing Issue New Motor

    Ok guys, I need some help. Pulling my hair out. I pulled the engine and did rings and bearings and changed the heads and camshaft. I went with trick flow 190 11Rs and a Anderson B31 camshaft. Here is the issue I'm having. I started the car and it fired right off. Idled very good and...
  2. Last Call Racing 4.6 All Motor 3v S197 Mustang 7500RPM!

    Last Call Racing 4.6 All Motor 3v S197 Mustang 7500RPM!

    GoPro - Last Call Racing 4.6 All Motor S197 Mustang vs LS1 Trans Am at Music City Raceway 1/8 mile. The fastest time to date is a 8.12@ 90 on factory tires. Also it went a 7.61@ 92 on 275/60/15 ET Streets. This car Makes incredible power in the upper RPM range especially. It pulls hard well...
  3. Last Call Racing Cammed All Motor S197 Walk Around - Comp 127600

    Last Call Racing Cammed All Motor S197 Walk Around - Comp 127600

    GoPro - Jonathan of http://www.LastCallRacing.com All Motor 3V S197 walk around and exhaust clip. The car has a 4.75L 11:1 MMR1000 Shortblock. It's an awesome motor that LOVES to rev, unlike the 5.0 strokers that are too much stroke. Ported Heads, Comp 127600 SPR stage 3 Cams, that make...
  4. Last Call Racing All Motor 3v 4.75L S197 Stock Tires 8.12@90

    Last Call Racing All Motor 3v 4.75L S197 Stock Tires 8.12@90

    GoPro - Jonathan of http://www.LastCallRacing.com Cammed All Motor 4.75L 3V S197 at Clarksville Speedway Dragstrip 1/8 track. The car has a 4.75L 11:1 MMR1000 Shortblock. It's an awesome motor that LOVES to rev, unlike the 5.0 strokers that are too much stroke. Ported Heads, Comp 127600 SPR...
  5. Last Call Racing All Motor 3v S197 Mustang 6400RPM Launch Break

    Last Call Racing All Motor 3v S197 Mustang 6400RPM Launch Break

    GoPro - Jonathan of http://www.LastCallRacing.com Cammed All Motor 3V 4.75L S197 Mustang GT. The first pass I launched at 5900 rpm and the car bogged pretty hard. It went a 12.61@110. Came back and tried to launch a little harder and broke the rear end. Should be in the 11's soon with a 4.56 and...