heater core

  1. T

    Heater Core fix

    I have heard several people say in different places its possible to replace the heater core without pulling the dash through the glove compartment. Has anyone done this or can think of a way it would be possible? I was thinking of cuting the box of where you can see it in the dash. Any advice?
  2. M

    Electrical car is possessed please help was supposed to leave for a 1200 mile trip tody

    Ok guys im going to try and explain this as best as I can my 1993 mustang gt is acting crazy!! So for the past week or so ive had a few electrical issues nothing I was to worried about. A few examples are my dome light went out. My headlights flashed once and about a month ago my headlights went...
  3. T

    Interior and Upholstery New user. 90 lx Seat bolt issue

    Hi, new to the forums and working on cars in general. Have to replace the heater core on my 90 lx 2.3 mustang. Step one I hear is to remove the seats. I've been stuck for 3 days trying to get the 2 rear bolts for the front seats to budge. I've used wd40, open and shut spray, box end wrench...
  4. M

    Replaced Heater Core, Now Anti Theft Is On

    I replaced my heater core a few days ago on my 99 GT. After putting it back together and dash back in it ran good for a day with the exception of feeling like it was accelerating differently on release of the clutch. Thought I was was paranoid and tired. The following day I started it to warm it...
  5. S

    2004 Ac Line Disconnects.

    Anyone have any suggestions on disconnecting the top AC line on 04 mustang. Replacing heater core but can't get the quick disconnect tools to work on that larger AC line. Hope I'm posting to the proper place. First time on the site. Thanks
  6. M

    Mouse Nest In Blower Area - Rip Out Entire Dash?

    I recently took my Mustang out of storage since 1998. There was a mouse nest under the seat, mouse crap on the floor and what looked to be some mouse crap and nest fluff in the blower area of the HVAC box. My question is, should I just take a small shop vac attachment to vacuum out that little...