rpm

  1. D

    1990 GT PROBLEM!!!!

    I have 1990 mustang gt and I'll be driving and everything is okay but let's say I'm in 5th gear if I go into neutral to coast the rpm rise to 3k, sometimes even stalls. I bought a new iac and fuel filter and I haven't stalled YET but I haven't drove it much , but it's still rising in rpm to 3k...
  2. M

    Mustang 2002 Idle/ starting the car when the engine is hot problems. ( help )

    Hi! I drive a mustang 2002 v6. I've had these problems for few years now and cant find a way to fix them. The problems occur only when the engine is hot. For instance when I'm stuck in traffic and not moving for few mins RPM starts to drop and hesitate I have to put it on park and hit the gas...
  3. C

    New Pony Owner Just Bought 94 Gt Convertible High Idle Issue Help

    Thanks first off to all you guys who take the time to read these and reply. Moving on, I just bought my first mustang. It's a 1994 GT Convertible Auto. I just ordered and got in Moog Racing Wheel Bearings and assembly, B&M Shift Kit, Cardone Select Mass Air Flow Sensor, and it already has a...
  4. N

    High Hanging Rpm Issues(2004 Gt)

    Disclaimer: I spent extensive time reading all posts I could find similar to this issue (I know about the infamous 4.6 hang issue) and replacing what I could, but still to no avail. Also a MASSIVE thank you to all the folks here that helped me get this far just from lurking and reading the...
  5. M

    Gt Engine Swap??

    I got a 2000 mustang gt Whats a good engine? i want to be abe to be fast as a cobra terminator or a 2ss camero 2016 or a 2012 boss I may be unrealistic but I want to be at least fast as a termi tho... If u have any suggestions lmk cause I have 30k n I don't know what to swap my engine with 1...
  6. 1NSTY2VSLN

    Best Shift Point??

    So I've been debating what the best place to shift at is when doing a hard pull. Normally i shift slightly above redline right about 6000-6100. I know the max hp is at 5250 rpm so that is about 800 rpm above peak hp. But with my stock 3.27 rear end, when i shift i drop down to 3900-4000 rpm...
  7. Russell P

    2004 3.9 V6 Engine Vibration

    I have been having some engine vibration for about a week now and I can't seem to figure it out. The whole engine shakes in idle and throughout the rpms (though it is worse around 1200 rpm). It also has a cough coming out of the back right tailpipe. There is also a rapid clicking type noise...
  8. C

    Need Help

    My 2006 v6 mustang seems to have a little rattle or chirp coming from the engine behind the dashboard. This happens when I just start the car and when I accelerate. When I start the car it it's at about 1100 rpm then after 30 seconds goes down to 700 approx. Oil pressure is a tad high.The car...
  9. GoldenEagle91

    SOLD Msd 6 Btm Ignition Control Module

    Price:200 City:Hartland State:WI Description: Used Ignition Control Module Model Year: 79-2004 Up for sale is a MSD 6 Series (6462) BTM Ignition Control Module with an Auto Meter Sport Comp Boost Gauge (3304). Included with the ignition module is the boost retard knob and a single pillar mount...
  10. 5.0foxbody91

    Engine Vibration Above 3000rpm

    Hey guys, I'm new to this forum, I've always loved mustangs, and I finally got one. It's a 91 lx hatch. I've had some trouble with it, but I have most of the problems fixed except for this vibration one. The shifter will vibrate like hell above 3000 rpms, whether I'm sitting still or going down...
  11. E

    High Idle When In Neutral While Coasting

    (2001 v6 manual stock just a cold air intake)Recently I've had a problem with my idle. When it's stopped its fine and sits around 850 or so. In the past couple weeks it's been acting up really bad. When drive and In-between shifts the Rpms will jump to about 3500 Rpms and stay there and not drop...
  12. D

    Steady Rpm Cam Hop?

    I have a built 306, aluminum heads, Cam, Rockers, with a trickflow intake, exhaust, all the normal mods. I don't know the specifics on the motor because I bought it from a guy who had it in a 92 weekend drag car. When I got it, it ran very rich and had no power. I replaced the cap and rotor...
  13. M

    Max Rpm For Stock 4.6 3v?

    sold a 2005 Mustang GT to a friend with 65K miles. I told him the torque curve of the engine goes down past the stock rev limiter but he still went ahead and changed the neutral rev limit to 7300 RPMs and drive rev limit to 7375 RPMs with the SCT tunner I sold with it. It's not my problem...
  14. 2013 Ford Mustang GT 5.0 Integrated RPM Shift Light Gauge Demonstration

    2013 Ford Mustang GT 5.0 Integrated RPM Shift Light Gauge Demonstration

    Video showing the shift light integrated into the gauges on my 2013 Ford Mustang GT premium. The RPM gauge tachometer will actually light up red in the gauges at 7000 rpms to tell you to shift. It's pretty neat and every 2013 Ford Mustang GT Premium has this feature. It only works at night time...