01 Crankshaft Position Sensor

D

dhood

New Member

Feb 2, 2004

46

0

0

Feb 25, 2004

#1

• Feb 25, 2004

• #1

Hey guys, I have an 2001 GT. I was talking with a Ford mechanic about some mods I want to do and he said that before I do anything I should install a crankshaft position sensor. He said Ford usually doesn't advance the timing enough and this will advance it. It is installed with 2 bolts next to the crank. He said it's expensive (about $200.00) but is worth it.

Question 1 - Is he right, does it work, does anyone know the details? How hard is it to install, etc.

Question 2 - Where can I buy one

Any and all info you can give me would be appreciated.

Dave

 

T

timgullion

New Member

Jan 2, 2004

22

0

0

Feb 25, 2004

#2

• Feb 25, 2004

• #2

Get a steeda timing advancer. it's what you are looking for.

 

2

281Ponies

New Member

Nov 14, 2003

190

0

0

Feb 25, 2004

#3

• Feb 25, 2004

• #3

Steeda Timing Adjuster.

Takes about 30 minutes to install just follow the directions closely and use a dab of sealant or RTV on the key way of the crankshaft.
It does help but performs better in combination with the U/D pulleys.

-Cale

 

D

dhood

New Member

Feb 2, 2004

46

0

0

Feb 26, 2004

#4

• Feb 26, 2004

• #4

Thanks for the advise. The Ford machanic said that all I need was the sensor. Why do you suspose he didn't mention the rest? He was very confident in his answer and I trust him. He has been turning wrenches at Ford for 15 years.

 

F

ForPointSex

Founding Member

Mar 19, 2002

395

0

16

Mercer, NJ

Feb 26, 2004

#5

• Feb 26, 2004

• #5

Mechanics don't know everything and he prob. dont even a 99+ mustang. My best friend is a mechanic at ford and he does not know all the aftermarket parts for the 4.6 engine. He knows everything about the 5.0 engine since he owned a couple of them. You can adjust the timing through a timing adjuster or a chip. Just use 91+ octane fuel.

 

01PonyGT

Member

Jul 27, 2003

304

0

16

Willow Grove, PA

Feb 26, 2004

#6

• Feb 26, 2004

• #6

As far as I know all 99+ GTs have a crankshaft position sensor neear the crank pulley. installing a timing adjuster near this sensor "tricks" the computer to advance the timing, but the sensor reads it as normal.

WES

 

F

FUNXGT

New Member

Feb 17, 2004

20

0

0

fast lane

Feb 26, 2004

#7

• Feb 26, 2004

• #7

i just went through my crankshaft sensor getting wacked by the reluctor wheel due to a wobbly pully... the crankshaft sensor is about 8 inches to the left of the crank pully an takes about 10 minutes to change and costs 22 bucks.... so where hes telling you 200 i have no idea where he got that price , unless he is including the reluctor wheel behind the crank pully...

get the adjuster and dont look back, the cps cant do what the adjuster can.

 

'01 Steed

Founding Member

Aug 2, 2002

482

0

16

Michigan

Feb 26, 2004

#8

• Feb 26, 2004

• #8

Yep, Steeda Timing Adjuster. Your Mechanic friend is out in left field. All distributorless ignition systems use crankshaft position sensors. You already have a CPS, so all you need is the t/a to mechanically advance the timing. The Steeda kit places the PIP wheel out in front of the crank damper, and it's slotted in a 3 bolt diametral pattern, so you can advance or retard the timing to your needs. Visit the Steeda site, or just go to the Partshopper section of this site. You'll see what we're talking about.
Good Luck, and tell that buddy of yours to get some training!