• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

03 GT steering issue

  • Thread starter Thread starter 03stangGTSC
  • Start date Start date Feb 24, 2008
0

03stangGTSC

New Member
Feb 24, 2008
17
1
0
Feb 24, 2008
#1
  • Feb 24, 2008
  • #1
hiya, new to the forum

Just picked up a nice 03 GT, it's a stick and the previous owner did just a few mods to it. Cold air intake, 18" cobra R rims, after market exhaust. The car is badass all day, I love it. Pulls harder than I seem to remember these cars pulling, clutch feels great, everything feels right on this car....

....except the steering. It isnt too big a deal but I wanted to ask about it in case this is a problem that others have had. I will be driving along at normal speeds, and the center position for the steering almost feels like it moves a little one way or the other. Ok, let me try to explain it better than that--I am on a smooth road, no bumps, at really any speed. The road has an easy bend to the right, so I steer around the curve, then straighten out. And then the car wants to pull a little bit to the right. Likewise, if I make a left turn, sometimes it then wants to pull a little to the left. It is only a little bit, and if I turn the wheel back far enough the opposite way, it will track straight again. The "center" spot doesnt move--when its pulling to one side, the steering wheel is turned that little bit too. So it isnt like slop in the steering rack.

Its completely manageable at all speeds, but I would rather replace something now than have the car leave me stuck later, or worse. Does this sound familiar to anyone? ARe there any ideas on what to check? It seems to be a random thing--doesnt happen each time the wheel is turned. A lot of the time I'll be driving straight, take my hands off the wheel and it tracks straight.

Any thoughts would be appreciated. This is my first Mustang, but I am basically familiar with cars. My other toys include a 1995 T-Bird Supercoupe and I have experience with RX7's so I can work my way around an engine bay. I am just looking for things to check.
 
M

me27821

Member
Oct 18, 2002
47
0
6
Long Island
Feb 24, 2008
#2
  • Feb 24, 2008
  • #2
I bought a bone stock 04 GT last summer. After a week, the steering went out. (previous owner must have had some fun before trading it in). Once the band new rack was in, I noticed the same thing you are talking about... I think. It's not slop, just exremely resposive to the slightest things. Bumps, curves in the road, wind. I can be on a two lane road, and the car will pull slightly to the left in the fast lane, and slightly to the right in the slow lane. Just because of the curvature of the road. I can even feel a soda can at the wheel. It's just the way the rack is designed. One major thing to consider though, does your care have an anftermarket suspension?
 
4

40oz

Member
Jan 9, 2006
499
3
18
Minneapolis
Feb 24, 2008
#3
  • Feb 24, 2008
  • #3
what kind of tires are on it? It could simply be the tires want to follow grooves in the road, but it's hard to tell from an internet post.

Tires with a sharp shoulder tend to follow road inperfections more than tires with a rounded shoulder. And performance tires tend to have a sharper shoulder. lower profile tires tend to emphasize this, as well.

You might get the alignment checked and have someone give the steering mechanics the once over, but it's probably just the effect of the low-profile tire.

Driving style can affect how this impacts your perception - when I drive my car normally, I simply guide it with a light hand on the wheel, but some of my friends will grip the wheel tightly and try to constantly correct for every little bump and groove. I drive straight and smooth, but they tend to wander in the lane more and quickly get tired driving my car.
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Feb 24, 2008
#4
  • Feb 24, 2008
  • #4
It sounds like it could be your tires. I have 03 17 inch cobra rims with a 275/40 tires and they seem to grip the road very well and want to turn along with the grooves of the road. Just keep your hands on the steering wheel at all times Also is your car lowered? If it is you might want to check the alignment.
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Feb 24, 2008
#5
  • Feb 24, 2008
  • #5
get all the front end parts checked out. itmay be an inner/outer tie rod issue. how many miles are on your car?
 

scupking

Active Member
Sep 18, 2005
1,186
1
36
Enfield, CT
Feb 25, 2008
#6
  • Feb 25, 2008
  • #6
Mine does the exact same thing. I had it aligned twice had a bump steer kit and x-2 ball joints installed but it still does it. Some times I can take my hand off the wheel and it will go strait other times it goes left then right. The only other thing I can think of is its because I have snow tires.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Feb 25, 2008
#7
  • Feb 25, 2008
  • #7
Wider tires is likely the issue - I too have 275/40s up front and, if the road has any ruts in it, she'll follow them perfectly. Never had much of an issue on the same roads with the stock 245/45 tires.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Feb 25, 2008
#8
  • Feb 25, 2008
  • #8
It is NOT any of the suspension parts or the rack. My 96 Cobra did the SAME thing. Theres is a bearing in the firewall around the steering shaft. Mine cracked and fell down the shaft, out of position from where it is supposed to be. I replaced that and it fixed the movement in the wheel. I also replaced the steering shaft with an 03 Cobra shaft...(only because Blue Oval Industries had a clearance on them for 35 dollars) When the bearing was missing the shaft moved in every direction about 1/4". To test for this, get under the car and grab the steering shaft at the firewall....move around...if you can't move it that is good...if you can move it that is the bearing.

Man, I fought this for two summers....inner and outer tie rods...NO...tires....NO, wheel alighment...NO, steering shaft...NO. I spent a lot of money throwing parts at it and it never solved the problem.
 
0

03stangGTSC

New Member
Feb 24, 2008
17
1
0
Feb 25, 2008
#9
  • Feb 25, 2008
  • #9
thanks for the replies, guys

the car has 90K miles on it

Tires are 245/45/ZR18 all around and are almost new

I will check out the things you guys suggested, thanks again!
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Feb 25, 2008
#10
  • Feb 25, 2008
  • #10
Hope you figure it out!
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Feb 25, 2008
#11
  • Feb 25, 2008
  • #11
directional tires will make your car act that way
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Feb 26, 2008
#12
  • Feb 26, 2008
  • #12
flstang65 said:
directional tires will make your car act that way
Click to expand...

how exactly do you figure that??
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Feb 27, 2008
#13
  • Feb 27, 2008
  • #13
SVT32VDOHC said:
It is NOT any of the suspension parts or the rack. My 96 Cobra did the SAME thing. Theres is a bearing in the firewall around the steering shaft. Mine cracked and fell down the shaft, out of position from where it is supposed to be. I replaced that and it fixed the movement in the wheel. I also replaced the steering shaft with an 03 Cobra shaft...(only because Blue Oval Industries had a clearance on them for 35 dollars) When the bearing was missing the shaft moved in every direction about 1/4". To test for this, get under the car and grab the steering shaft at the firewall....move around...if you can't move it that is good...if you can move it that is the bearing.

Man, I fought this for two summers....inner and outer tie rods...NO...tires....NO, wheel alighment...NO, steering shaft...NO. I spent a lot of money throwing parts at it and it never solved the problem.
Click to expand...

the slop would be felt in the steering wheel as well, correct?

I'm able to move the steering wheel about .5-1" in both directions without it affecting the direction of the car. got a guide or anything to help with the replacement of the bearing?
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Feb 27, 2008
#14
  • Feb 27, 2008
  • #14
SaleenGT2001 said:
how exactly do you figure that??
Click to expand...

+1
 
P

poindexternasty

New Member
Apr 29, 2008
148
0
0
Jul 9, 2008
#15
  • Jul 9, 2008
  • #15
This may be the most obvious (and easiest to overlook) thing.... are your directional treads on the tires aligned properly? That is, is the Rotation arros ---> pointing toward the front of the car?
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Jul 9, 2008
#16
  • Jul 9, 2008
  • #16
back from the dead.......................tread direction can be backwards and it wont matter
 
You must log in or register to reply here.

Similar threads

C
Shifter lever arm issue
  • chris1993
  • Jan 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
180
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 24, 2026
Rcdgl
R
D
2003 Mustang Steering pulls left bad after and accident , screeching while driving help please
  • dustbustet707
  • May 9, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
311
1996 - 2004 SN95 Mustang -General/Talk- May 13, 2025
Noobz347
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
842
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
J
Severe shaking/vibrations in steering wheel
  • jacket999
  • May 20, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
782
SN95 V6 Mustang Tech Jun 1, 2025
NtheGAME
N
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
191
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?