T Tommy91Stang New Member Nov 12, 2003 31 0 0 Glenolden Mar 9, 2004 #1 Mar 9, 2004 #1 i just wanted to know if i could take the trans out of the 95 cobra and put it in my 91 gt with no problem
i just wanted to know if i could take the trans out of the 95 cobra and put it in my 91 gt with no problem
Starscream88 New Member Mar 8, 2003 1,277 1 0 Park Ridge NJ Mar 9, 2004 #2 Mar 9, 2004 #2 Should be fine, I think you need the bellhousing as well,
cenok is family 15 Year Member Jun 25, 2003 1,409 69 79 Norman, Ok Mar 9, 2004 #3 Mar 9, 2004 #3 yeah im trying the same thing...you're going to either need the bellhousing as well, but that will put your shifter further back in the car, or you can switch out the input shaft and bearing retainer sleeve (what im doing).
yeah im trying the same thing...you're going to either need the bellhousing as well, but that will put your shifter further back in the car, or you can switch out the input shaft and bearing retainer sleeve (what im doing).
T Tommy91Stang New Member Nov 12, 2003 31 0 0 Glenolden Mar 9, 2004 #4 Mar 9, 2004 #4 would the 95 cobra trans bolt on to the 91 gt bellhousing
a_turbo_stang Member Apr 13, 2003 346 0 16 Cincinnati Ohio Mar 9, 2004 #5 Mar 9, 2004 #5 It will bolt up but the input shaft is a lil longer. You will need the 95 bellhousing or swap out input shafts.
It will bolt up but the input shaft is a lil longer. You will need the 95 bellhousing or swap out input shafts.