1991 Phlenum tubing

[Blueinfan]

Hi All,

Looking for some help on looking this tube/hose and hoses on the bottom of the phlenum.

Where can i find them and hope someone sells them? If not, what can I use to substitute these?

thx

 

[AeroCoupe]

This is the hose from the PVC valve to the upper intake:

https://lmr.com/item/LRS-6664A/1986-95-Mustang-50L-Pcv-Valve-To-Upper-Intake-Hose

I think most just run ethanol tolerant fuel line for the other hose. Just remove it and take it to a parts store so you get the correct ID hose.

 

[Blueinfan]

This is the hose from the PVC valve to the upper intake:

https://lmr.com/item/LRS-6664A/1986-95-Mustang-50L-Pcv-Valve-To-Upper-Intake-Hose

I think most just run ethanol tolerant fuel line for the other hose. Just remove it and take it to a parts store so you get the correct ID hose.

thank you!

 

[AeroCoupe]

Make sure the hose fits tight on the barb/nipple as you do not want a leak.

 

[General karthief]

You can piece together the hose from the throat to the plenum from the Dorman stuff at a parts store, there are pics in the catalog or like stated above just use fuel line hose, the plenum to pcv is also listed in the Dorman catalogue, and you'll pay less than LMR, no shipping required.

 

[Mustang5L5]

Fuel injection hose. I forget the ID. I have a peice of it around here somewhere I can measure