• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

2005 Door Panels

  • Thread starter Thread starter tomcat61
  • Start date Start date May 13, 2015
T

tomcat61

New Member
May 13, 2015
2
0
1
May 13, 2015
#1
  • May 13, 2015
  • #1
I need both my door panels replaced due to the glue failing and me messing up the DIY job... can anyone help me with info on where to get replacement panels or where i can get them re-upholstered.
 
N

nbk13nw

Member
Mar 31, 2005
186
4
19
Newport News, Va
May 13, 2015
#2
  • May 13, 2015
  • #2
Any good upholstery shop can do the work. If you pull the panels and drop them off I am sure it will cost less. I think Latemodel restoration had replacement leather inserts. Our you can Google them... just look for door panel inserts.
 
Z

zwooky

Member
Oct 27, 2004
35
0
6
Tampa, Fl.
Jun 22, 2015
#3
  • Jun 22, 2015
  • #3
Any luck? I'm in the same position as you. Tried to fix them myself but they turned out horrible.
 
R

Red Pony

Member
Dec 22, 2004
92
0
7
Chicago Area
Sep 2, 2015
#4
  • Sep 2, 2015
  • #4
Same here, just driver side. What did you try that failed? Was thinking of trying to disassemble and apply adhesive to the back of leather insert and smooth out.
 
R

Red Pony

Member
Dec 22, 2004
92
0
7
Chicago Area
Oct 26, 2015
#5
  • Oct 26, 2015
  • #5
Anyone find a successful fix or proper adhesive to apply to the inserts?
 
M

Mikestang13

New Member
Nov 28, 2010
1
0
0
Oct 27, 2015
#6
  • Oct 27, 2015
  • #6
I think these are the part you are asking about. its on LMR : Ford Mustang Door Panel Inserts Kit (05-09)
 
R

Red Pony

Member
Dec 22, 2004
92
0
7
Chicago Area
Feb 25, 2017
#7
  • Feb 25, 2017
  • #7
Repaired mine with 3m spray adhesive, peel back and make sure you use a brush to remove all the old adhesive and foam padding, it will easily come of if you rub it back and forth with a stiff brush. Once all loose material is removed mask any area you want to keep clean for adhesive overspray, then spray both the leather panel and door side, wait until glue is tacky to the touch then start to smooth back into place using a plastic scraper or something else that is flat with a bit of flex, tuck in edge all around and your done. Looks like factory, cost 8 bucks for adhesive.
 
You must log in or register to reply here.

Similar threads

N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
276
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
T
1979 Inner Door beltline/dew wipe replacement part
  • toasterboy1
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
333
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2025
MinervaHBanta
M
N
Thermostat housing
  • nataliaisafraid
  • Dec 8, 2025
  • 2005 - 2009 Specific Tech
Replies
2
Views
236
2005 - 2009 Specific Tech Apr 2, 2026
Cmrd
C
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
173
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
B
Rear quarter window regulator
  • BADAZZOMBIE08
  • Mar 29, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
133
2005 - 2009 Specific Tech Mar 29, 2026
BADAZZOMBIE08
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?