Nice !
Not trying to be a jerk but have done quite a bit of electrical work over the years, looks like the outlet behind the work bench and
the "LB" dropping down to the fridge outlet are done in PVC.
For safety reasons it's best to use metallic tubing in a garage environment, EMT is a good choice for a residential garage.
Only because PVC can be cracked/broken fairly easily if hit ( potential short hazard ) , especially when cold.
Again not trying to be annoying just some advise, Lord knows I could always use some.
Thanks! I will always take advice on how to do things better/ right. I guess I see your point about the conduit breaking.
I did a short run a while ago from the panel with 3 outlets for the workbench, and just finished it up for the frige mostly with what I had (and Ace did not have a regular pull ell).
Luckily the conduit and outlets are usually behind all the crap that get piled on the bench! Lol