3g -130amp 4awg Fuse Size?

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Jul 31, 2013

#1

• Jul 31, 2013

• #1

So if a 4awg wire can only handle around 136amps before it burns. Should the relative size fuse be 125amps or 150amps??

Why do I see kits that have 200amp fuses?? The fuse wouldn't blow before the wire's toast, correct??

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Jul 31, 2013

#2

• Jul 31, 2013

• #2

I would recommend 125 amps. The fuses all have the capability of carrying up to 110% of load for an extended period of time.

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Jul 31, 2013

#3

• Jul 31, 2013

• #3

jrichker said:

I would recommend 125 amps. The fuses all have the capability of carrying up to 110% of load for an extended period of time.

Click to expand...

Ok thanks for confirming that for me, I trust your "Intel".
I'm doing the 3g upgrade tomorrow, so I wanted to cover all the fine points.

Got a barely used Ford Motorcraft 3g 130amp, top bolt hole already tapped, already has right pulley, 4awg power wire already assembled with mega fuse holder with 200amp fuse(which I will change to 125amp) for $150. Came off an '87 mustang.

Already ran my 4awg grounds, neg battery pigtale and rear firewall/intake.

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Jul 31, 2013

#4

• Jul 31, 2013

• #4

All you need to do is wire up the stator wire and clearance the alt bracket. Run the 3G power cable to the Battery side of the solenoid.

 

Shakerhood

20+ Year Stangneter

Oct 28, 2004

3,356

208

114

Ohio

Jul 31, 2013

#5

• Jul 31, 2013

• #5

I used the 125 Amp Fuse in my car too, I have always been confused by peoples choices of larger fuses also.

 

Reactions: Grabbin' Asphalt

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Aug 1, 2013

#6

• Aug 1, 2013

• #6

mikestang63 said:

All you need to do is wire up the stator wire and clearance the alt bracket. Run the 3G power cable to the Battery side of the solenoid.

Click to expand...

I've heard that some people didn't have to cut the alternator bracket while most have to cut it,
I'm crossing my fingers for that
but I won't cut/splice that stator wire until I've got it mock installed.
I've been running a 175 black magic fan with crank/waterpump underdrive pulleys.
While using the stock alternator 75amp and stock pulley.
I'm soooooooo ready for some JUICE!!!

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Aug 1, 2013

#7

• Aug 1, 2013

• #7

Modifying the alternator mount bracket isn't t that big of a deal. I used a rotary file in an air drill and had it all filed out and smoothed in about 10 minutes. I removed more than the minimum amount of metal and smoothed it out so that it looked like a factory job after a few thousand miles of dirt got on it...