403hp at rear wheels no super or turbo

tontot77 · Apr 6, 2007

ALLOY2007GT · Apr 6, 2007

How can those mods you posted produce 150 HP more at the crank? Impossible. you forgot to add the 50 shot of nitrous to your list.

And let me get this straight. You can post the FAST intake results, but not prove it with a dyno sheet? Thats total contradictory crap. dont come and post this stuff and get people excited about something that is totally not true. If FAST knew you posted their results prematurely they would have your ass on a platter, but since you did release results, you should have no issues posting a dyno sheet. and how come you dont? because you're a liar. If you cant post the dyno sheet but can post the results, I will contact FAST myself and see what they have to say about it. Ill give you 24 hours.

northy_polk · Apr 6, 2007

geneos5546 said:
actually im running kooks long tubes open headers,also ihave adjusted the carburator chain and drained all the blinker fluid, and put on the flux compasator rated at 223 jigawatts

you IDIOT! it's 2.21 jigawatts!!! duh!

[subtext=sarcasm]

Pro Mod · Apr 6, 2007

Show me a timeslip of the car trapping about 113 and I'll believe it. You can keep your dyno sheets.

speedin gt/cs · Apr 6, 2007

subzero05 said:
Ok, sure

If you don't believe me about the car with 367rwhp,look at this:http://www.mustangforums.com/m_2940878/tm.htm

khendrix2374 · Apr 6, 2007

Pro Mod said:
Show me a timeslip of the car trapping about 113 and I'll believe it. You can keep your dyno sheets.

There ya go! Dyno's can be rigged to read alot higher for advertisement purposes..

Claims denso plugs... So he must have aftermarket heads.... Hopefully ported.

103 octane tune.. won't net a whole lot more HP than a 93 tune. Maybe 15-18.

I could believe 370-375.. not 403..... dyno error.

Let's see a couple timeslips.

CatmanJJ · Apr 6, 2007

BS aside 400 rwhp is pretty sweet esp since DOHC 4vs put about the same with a nice cam package along with headwork and I think the FR500 intake to go along with it, but taht's major $$$ for these motors. Definitly much more cost effective to go the F/I route.

But this guy knows his **** around the Mustang circles and look what he has to say about the 3v 4.6 and 400 rwhp...http://www.corral.net/forums/showpost.php?p=6571928&postcount=32 But with a new intake manifold who knows.

XStanger · Apr 6, 2007

This is directly from the Brenspeed site. This is their personal test vehicle. This car I has the same mods you mentioned and Long Tubes/TB

"Now that our new cams were helping the GT pump out 340 rwhp we decided it was time to employ the help of the new BBK Twin Blade 62mm throttle body. Usually the stock throttle body is plenty to support a stock engine but considering the new cams responded well to the 95mm C&L Racer intake we couldn’t think of a reason to not try out the BBK throttle body. The install of the BBK throttle body only takes about 25 minutes. With no other change except the addition of the BBK Throttle Body our GT jumped to 347 rwhp and 326 ft. lbs. of torque. Just to confirm the gain we put the stock throttle body back on and power fell back to 340 then reinstalled the BBK to see power jump again to 347 rwhp. "

Tough to believe that a FAST intake would produce 50 more RWHP. Not calling BS, but sounds tough to believe. I hope it is the case though, and if it is I would definately consider one.

'13_ImpactBlue_GT · Apr 6, 2007

geneos5546 said:
"]thats right no supercharger no turbo ]2007 gt/cs 5 speed 410 gears steeda cai sct tuner under drive pulleys short throw shifter fast intake comp cams denso plugs 103 octane tune (using experimental fast intake is not in production yet but theres one on my car thanks to my brother in law )car dynoed at 403rwhp 420 torq

Hmmmmm........................no punctuation = 1 big azz run on sentence, must be a honda owner:SNSign:

tom281 · Apr 6, 2007

Does this guy work for BBR??

CatmanJJ · Apr 6, 2007

tom281 said:
Does this guy work for BBR??

tick.....

tick....

tick.....

BOOM!!!

tom281 · Apr 6, 2007

LOL I knew someone would remember that one.......

stang8urimport · Apr 6, 2007

No, I think he works for Agent 47

anthony05gt · Apr 7, 2007

The head design WON'T allow it. The valves cannot flow that well without forced induction or nitrous. This is BS!(403rwhp)

speedin gt/cs · Apr 7, 2007

To get within MAYBE 20rwhp of 400rwhp you would need a big cai(like C&L Racer),93 octane tune, Mufflers, High Flow Mid Pipe & Cats, UDP's, CMDP's, LT headers, aluminum driveshaft, Stg. 3 Comp Cams, Stg. 3 Livernois Heads, and lots of dyno tuning. Also instead of waiting for the FAST intake manifold to come out,you could go to a shop who knows what they are doing and get your intake manifold ported.

CatmanJJ · Apr 7, 2007

Aren't the intakes plastic, how can you port a plastic manifold?

speedin gt/cs · Apr 7, 2007

http://www.modularfords.com/forums/2005-mustang/ported-intake-manifold-79988.html

Read this, there is someone in that thread that ported their intake manifold.

Daggar · Apr 7, 2007

Are we being Wenzeled? Why is it always the folks with no post count?

jerzeykilla · Apr 7, 2007

damn, i read like the first half of his post and though that the fast intake was finally released....guess not. any word on that anyways?? heard c&l has one in the works...

speedin gt/cs · Apr 7, 2007

Daggar said:
Are we being Wenzeled? Why is it always the folks with no post count?

What do you mean by why is it always members with no post count?

403hp at rear wheels no super or turbo

Do I look like a :taco: in this picture?

New Member

New Member

Member

New Member

New Member

Captain Tangnet

Angry Little Elf

New Member

Captain Tangnet

New Member

Autozone Junkie

Active Member

New Member

Captain Tangnet

New Member

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency