Progress Thread 8 ribbed for Eatons pleasure...

KZGUNS

I can swing up to 11”
Jul 23, 2018
642
271
73
43
chardon, Ohio
As some of you know I am purchasing @a91what Eaton m112 he custom put together for the sbf. I figured I’d start a thread showing my progress getting everything ready. I’ll let the pics tell most of the story. I picked up a summit balancer and a trigger wheel and spacer from 64bit tuning. The spacer is cut to properly align the pulley. I discovered however that it’s designed for a stock style balancer and there was no provision on the summit balancer to holt Tge spacers centered. I took the spacer kit that came with the balancer and chucked it up in my lathe to cut it down. Once that was figured out I made a plate I’ll be building off of for the vr sensor, it’s in a rough state now but I’ll trim it down and clean it up before I’m done. Don’t mind the grungy engine and bay, I’ll be addressing that this winter when I pull the engine and repaint and clean up everything.
 

Attachments

  • Like
Reactions: General karthief
  • Sponsors(?)


stanglx2002

CT Material here
Mod Dude
Jul 7, 2005
1,403
962
154
Thank you for starting a thread on this as this kit is going to a good home. The more pictures the better on the assembly progress of this on your car.
 
  • Like
Reactions: KZGUNS

KZGUNS

I can swing up to 11”
Jul 23, 2018
642
271
73
43
chardon, Ohio
Thank you for starting a thread on this as this kit is going to a good home. The more pictures the better on the assembly progress of this on your car.
i love pictures as they tell a better story than I can lol. Just have to remember to take em when I’m on roll and plowing through a project.
 

KZGUNS

I can swing up to 11”
Jul 23, 2018
642
271
73
43
chardon, Ohio
Little bit more progress despite my welding helmet trying to blind me. Made a mount for the sensor. It’s not sexy billet aluminum but it’ll work. I still need to slot the holes to gain some adjustability to better square it up to the tooth but it’s sitting at ~.025 gap right now but a bit crooked.
 

Attachments

  • Like
Reactions: 90sickfox

KZGUNS

I can swing up to 11”
Jul 23, 2018
642
271
73
43
chardon, Ohio
Oh and I scored this on eBay for $19. Most are for sale at $100. It’s a bronco/f150 crank pulley and it’s about 6.5” which is roughly a 1/2” bigger than stock. According to Steve that should be about ~10psi not sure if I can use it without meth injection but will have when I’m ready for that in the spring maybe.
 

Attachments

  • Like
Reactions: TOOLOW91

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,128
6,022
204
31
Hillsborough county
Is there any play in that sensor mount? can you make it move with slight effort? We dont want that thing moving when the engine is running.
 
  • Like
Reactions: KZGUNS

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,128
6,022
204
31
Hillsborough county
AWESOME!!
I wonder who you bought this menagerie of JY stuff never meant to be bolted to a SBF from.... :cautious:

I guess i need to go ahead and compile those pictures into an album for you.
 
  • Like
Reactions: KZGUNS
Thread starter Similar threads Forum Replies Date
P For Sale PAXTON NOVI 2000 SUPERCHARGER KIT WITH 10 RIB RENEGADE BRACKET & ANDERSON POWER PIPE / FILTER Engine and Power Adder 4
P For Sale PAXTON NOVI 2000 SUPERCHARGER KIT WITH 10 RIB RENEGADE BRACKET & ANDERSON POWER PIPE / FILTER Engine and Power Adder 0
E 69 302 with 6 rib pulleys? Classic Mustang Specific Tech 5
a91what 87-93 8+ Rib Conversion... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
bhuff30 Tire Wear Inside Rib SN95 4.6L Mustang Tech 0
P Ford Racing 10 Rib/alternator Fix 2010 - 2014 Specific Tech 0
Nightfire Expired Professionally Coated 6-rib Procharger Pulley Engine and Power Adder Parts 0
Ford Mach 1 SOLD Procharger 3.20 6 Rib Pulley Engine and Power Adder Parts 3
Z Expired Fs Or Trade Vortech 8 Rib 6.87 Crank Pulley Engine and Power Adder 2
B Expired 4.6L 8 rib pulley kit Engine and Power Adder Parts 1
musclemustangcb 99-04 2v Induction Power Package- I.c. V2 Si Trim, Victor Efi, 6061, Bgg 8 Rib, 2kmiles On All. Engine and Power Adder Parts 0
musclemustangcb for sale: vortech 6 rib 3.33 pulley/ free shipping Engine and Power Adder Parts 1
J Aluminum Underdrive Crank Pulley - 6 rib Engine and Power Adder 1
MM 550 Vortech 6 rib 2.62 Pulley Engine and Power Adder Parts 0
musclemustangcb Where can I find a 8 rib conversion kit ? 1996 - 2004 SN95 Mustang -General/Talk- 2
L 8 rib renegade pulley set Engine and Power Adder 0
3ponyshow Is an 8 rib pulley upgrade really necessary? SN95 4.6L Mustang Tech 3
Stangstroke Change from 6 rib belt to an 8 rib for my KB 1994 - 1995 Specific Tech 3
W Reichard Racing 3.00 Vortech Supercharger Pulley 10 Rib Other Classifieds 1
J Ribbed rear end pumpkin, 3.50 gearing, brand new posi Drivetrain Parts 3
R INNOVATIVE WEST 8 RIB 10% overdrive Engine and Power Adder Parts 0
S vortech 3.33 6 rib pulley NEW Engine and Power Adder Parts 0
Back2Mustangs Innovators West, Standard Diameter, 8-Rib Dampener (Product Code: 802) (used 15k mi) Engine and Power Adder Parts 0
L 8-rib kit, ATI Damper, RR 2.8 pulley, etc Engine and Power Adder Parts 2
JymboSlice G.I.Joe 8 rib setup or House of Boost 2VR 1996 - 2004 SN95 Mustang -General/Talk- 5
S Kenne Bell 6 Rib Pulleys, and Procharger 3.60 Pulley! Engine and Power Adder Parts 3
S Kenne Bell 2.2L Kit w/ 8 Rib and ALOT of extras for 96-04 GT Engine and Power Adder Parts 1
A IW 10% OD crank pulley (8 rib) Engine and Power Adder 0
arnie93lx 12 rib Blower pulley, 4.50" offset from D1 Engine and Power Adder 15
arnie93lx 12 rib 4.25" pulley from D1SC Engine and Power Adder 1
P Belt skpping a rib on crank pulley after smog bypass 1994 - 1995 Specific Tech 17
Q Steeda 10 rib system 2005 - 2009 Specific Tech 10
S smallest 6-rib pulley that will hold ? SN95 4.6L Mustang Tech 0
MyBloodRunsBlue Question about GI Joe 8 rib kit 1996 - 2004 SN95 Mustang -General/Talk- 4
jivepepper 8 rib AC delete? SN95 4.6L Mustang Tech 10
Wicked65 8 Rib Pulley's 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
SaleenGT2001 CANT FIND AN 8 RIB BELT TO FIT! 1996 - 2004 SN95 Mustang -General/Talk- 2
B 8 rib conversions 1996 - 2004 SN95 Mustang -General/Talk- 7
6 what are those ribbed tail light panels on a 67 deluxe called ?? 1965 - 1973 Classic Mustangs -General/Talk- 6
S can i run a 6 rib belt on an 8 rib pulley? SN95 4.6L Mustang Tech 3
ProCharger GT 8 Rib Pulley Kit? SN95 4.6L Mustang Tech 9
S Do I need to upgrade to 8-rib pulleys? SN95 4.6L Mustang Tech 7
A Ribbed WP pulley Fox 5.0 Mustang Tech 6
S Randy...I need 8 rib swap info 1996 - 2004 SN95 Mustang -General/Talk- 16
B Please no laughing or ribbing...... 2005 - 2014 S-197 Mustang -General/Talk- 18
S lost a rib on the serpentine belt SN95 4.6L Mustang Tech 4
SaleenGT2001 8 rib conversion SN95 4.6L Mustang Tech 4
ADRENLN how many of you running 8 rib set up? problems? SN95 4.6L Mustang Tech 11
ADRENLN anyone have fords a/c delete with an 8 rib blower set up? SN95 4.6L Mustang Tech 8
PIMTOUT VORTECH 8 rib pully...measurement 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
Similar threads