Progress Thread She’s a runner

KZGUNS

I can swing up to 11”
5 Year Member
Jul 23, 2018
1,002
599
133
chardon, Ohio
As some of you know I am purchasing @a91what Eaton m112 he custom put together for the sbf. I figured I’d start a thread showing my progress getting everything ready. I’ll let the pics tell most of the story. I picked up a summit balancer and a trigger wheel and spacer from 64bit tuning. The spacer is cut to properly align the pulley. I discovered however that it’s designed for a stock style balancer and there was no provision on the summit balancer to holt Tge spacers centered. I took the spacer kit that came with the balancer and chucked it up in my lathe to cut it down. Once that was figured out I made a plate I’ll be building off of for the vr sensor, it’s in a rough state now but I’ll trim it down and clean it up before I’m done. Don’t mind the grungy engine and bay, I’ll be addressing that this winter when I pull the engine and repaint and clean up everything.
 

Attachments

  • F2F86121-5851-4C9C-91FC-2A7BD95FA4FD.jpeg
    F2F86121-5851-4C9C-91FC-2A7BD95FA4FD.jpeg
    251.2 KB · Views: 416
  • 7DF12B11-311E-4541-B494-60DB7468B3DA.jpeg
    7DF12B11-311E-4541-B494-60DB7468B3DA.jpeg
    192 KB · Views: 414
  • C5F850CB-0F9C-4AB7-9700-C21200E07768.jpeg
    C5F850CB-0F9C-4AB7-9700-C21200E07768.jpeg
    189.8 KB · Views: 406
  • 6EF3D5C8-85D8-4EBA-A9B4-8DFAB3D8C45C.jpeg
    6EF3D5C8-85D8-4EBA-A9B4-8DFAB3D8C45C.jpeg
    136.4 KB · Views: 400
  • F3FBE9CF-5F3E-4125-B937-1CE8F3BFE136.jpeg
    F3FBE9CF-5F3E-4125-B937-1CE8F3BFE136.jpeg
    162.3 KB · Views: 412
  • Like
Reactions: 1 user
  • Sponsors (?)


More pics. We love pictures
 

Attachments

  • DEC6993E-0261-4454-BD28-D46549CDBF69.jpeg
    DEC6993E-0261-4454-BD28-D46549CDBF69.jpeg
    165.3 KB · Views: 398
  • E74398F5-26ED-4B53-AE1D-92B0C61AFF25.jpeg
    E74398F5-26ED-4B53-AE1D-92B0C61AFF25.jpeg
    159.7 KB · Views: 410
  • 943B7CE5-3B52-42AF-8F3C-E03AD7214080.jpeg
    943B7CE5-3B52-42AF-8F3C-E03AD7214080.jpeg
    216.6 KB · Views: 403
  • CEE696FE-820A-43E8-8B43-2AB0CC38FE56.jpeg
    CEE696FE-820A-43E8-8B43-2AB0CC38FE56.jpeg
    209.6 KB · Views: 410
  • D5C96FEB-4C01-4CF0-B60E-A19A58154619.jpeg
    D5C96FEB-4C01-4CF0-B60E-A19A58154619.jpeg
    215.3 KB · Views: 434
  • Like
Reactions: 4 users
Thank you for starting a thread on this as this kit is going to a good home. The more pictures the better on the assembly progress of this on your car.
 
  • Like
Reactions: 1 user
Little bit more progress despite my welding helmet trying to blind me. Made a mount for the sensor. It’s not sexy billet aluminum but it’ll work. I still need to slot the holes to gain some adjustability to better square it up to the tooth but it’s sitting at ~.025 gap right now but a bit crooked.
 

Attachments

  • 7AB19021-8498-4F63-8978-EFD2D8E13E92.jpeg
    7AB19021-8498-4F63-8978-EFD2D8E13E92.jpeg
    156.7 KB · Views: 416
  • 5F065637-DF71-41E8-8C63-CB335D64AAA3.jpeg
    5F065637-DF71-41E8-8C63-CB335D64AAA3.jpeg
    182.5 KB · Views: 412
  • 68996FE8-0A7B-4CA1-985A-41D8A83D1279.jpeg
    68996FE8-0A7B-4CA1-985A-41D8A83D1279.jpeg
    263.2 KB · Views: 428
  • 68A92665-5210-4DDA-86D0-33CD405F72A2.jpeg
    68A92665-5210-4DDA-86D0-33CD405F72A2.jpeg
    259.8 KB · Views: 424
  • Like
Reactions: 1 user
Oh and I scored this on eBay for $19. Most are for sale at $100. It’s a bronco/f150 crank pulley and it’s about 6.5” which is roughly a 1/2” bigger than stock. According to Steve that should be about ~10psi not sure if I can use it without meth injection but will have when I’m ready for that in the spring maybe.
 

Attachments

  • 3B2985A7-A92F-41A2-80ED-61C48B58E271.jpeg
    3B2985A7-A92F-41A2-80ED-61C48B58E271.jpeg
    287.6 KB · Views: 409
  • Like
Reactions: 1 user
Working on getting some adjustability in this sensor mount. How critical is alignment? How’s this look?
 

Attachments

  • A4F3ABE3-7518-4F5D-BAD9-8F7D5D554022.jpeg
    A4F3ABE3-7518-4F5D-BAD9-8F7D5D554022.jpeg
    266.5 KB · Views: 391
  • E5322766-12EB-437E-8838-86C5199E3B97.jpeg
    E5322766-12EB-437E-8838-86C5199E3B97.jpeg
    564.9 KB · Views: 387
Trimmed up and painted. Done with that now. I’m gonna clean up the injector harness and put on new loom. No point in having these unused plugs for egr etc on here.
 

Attachments

  • 6338BD3C-5CA8-4F32-A016-1487AE545BEC.jpeg
    6338BD3C-5CA8-4F32-A016-1487AE545BEC.jpeg
    227.5 KB · Views: 404
  • Like
Reactions: 1 user
Trimmed up and painted. Done with that now. I’m gonna clean up the injector harness and put on new loom. No point in having these unused plugs for egr etc on here.
 

Attachments

  • 4BDB9B93-438B-4536-9FA4-A8AB55BCF192.jpeg
    4BDB9B93-438B-4536-9FA4-A8AB55BCF192.jpeg
    227.5 KB · Views: 409