• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

86 mustang no start

  • Thread starter Thread starter noslow1986
  • Start date Start date Apr 23, 2006
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
Apr 23, 2006
#1
  • Apr 23, 2006
  • #1
i tried to start my car but all it does it click click click at the senoid. i bought a new starter battery senoid check all ground wires but nothing it will only start if i pop the clutch whats the problem
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Apr 23, 2006
#2
  • Apr 23, 2006
  • #2
did you ck your engine to chassis ground yet?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 23, 2006
#3
  • Apr 23, 2006
  • #3
Does it start when you jumper the solenoid terminals?

Does it start when you apply power to the solenoid trigger terminal?

If yes to both... The ignition switch or the wiring going/coming from/to it is bad.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 23, 2006
#4
  • Apr 23, 2006
  • #4
Here's a checklist:

Since some of the tests will bypass the safety interlocks, make sure that the car is in neutral and the parking brake is set. Becoming a pancake isn’t part of the repair process…

Check battery, terminal connections, ground, starter relay switch (also known as solenoid) and starter in that order.

A voltmeter is handy if you are familiar with how to use it to find bad connections. Measure the voltage drop across a connection: more than .5 volts across a connection indicates a problem.
See http://www.fluke.com/application_notes/automotive/circuit.asp?AGID=1&SID=103 for help


1.) Will the car start if it is jumped? Then clean battery terminals and check battery.

2.) Check the battery to engine block ground, and the ground behind the engine to the firewall.

3.) Jump the big terminals on the starter relay next to the battery with a screwdriver - watch out for the sparks! If the engine cranks, the starter and power wiring is good. The starter relay is also known as a starter solenoid.

4.) Then pull the small push on connector (red wire) off the starter relay (Looks like it is stuck on a screw). Then jump between the screw and the terminal that is connected to the battery. If it starts, the relay is good and your problem is in the rest of the circuit.

5.) Remember to check the ignition switch, neutral safety switch on auto trans and the clutch safety switch on manual trans cars. If they are good, then you have wiring problems. See http://www.autozone.com/images/cds/gif/large/0900823d80195963.gif for 88-90 year cars .OR see http://www.autozone.com/images/cds/gif/large/0900823d80195964.gif for 91-93 year cars. See http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-95 model cars.

6.) The starter may be hung, loosen up the bolts that hold it on, and give it a good whack with a big hammer. Tighten up the bolts and try again.

7.) If that doesn't work, use a jumper cable from the positive lead on the battery direct to the starter post where the big wire from the relay connects. If it cranks then, it is the power wire from the relay gone bad. This will be hard to do, since there isn't much room to do it.

8.) Pull the starter and take it to Autozone or Pep Boys and have them test it. Starter fails test, then replace it. If you got this far, the starter is probably bad.
 
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
Apr 23, 2006
#5
  • Apr 23, 2006
  • #5
i tried all kinds of things

i tried everything i could of think of i had 3 people look at it no luck i tried everything begiging to piss me off.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Apr 23, 2006
#6
  • Apr 23, 2006
  • #6
noslow1986 said:
i tried everything i could of think of i had 3 people look at it no luck i tried everything begiging to piss me off.
Click to expand...

If you tried all that stuff give the starter afew taps with a hammer and try to start it. I bet its the starter.
 
You must log in or register to reply here.

Similar threads

M
Need help please
  • Mikey62666
  • Oct 12, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
133
2005 - 2014 S-197 Mustang -General/Talk- Oct 14, 2026
gkomo
T
Inside is completely dead
  • TunaCar
  • Oct 18, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
355
SN95 4.6L Mustang Tech Oct 20, 2026
DadLife0724
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
419
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
604
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?