98 4.6 Headers???

S

soonerfever

New Member

Jul 25, 2006

47

1

0

May 4, 2008

#1

• May 4, 2008

• #1

Guys I am sorry because I know this has been posted before but I can't seem to find anything helpful. I just found out tonight that my manifolds are leaking (small holes) and need to be replaced. I am looking at going with headers. I am just concerned about them hooking up with my BBK O/R H-Pipe. It is just the H-Pipe used for the standards 4.6's.

Also any suggestions on headers?

 

four six

Member

Jan 19, 2006

506

2

18

Hobart, IN

May 4, 2008

#2

• May 4, 2008

• #2

Get some Long Tubes

Kooks
BBK
MAC
SLP

 

Wolvrin704

Member

Apr 17, 2007

120

0

17

Milford, OH

May 4, 2008

#3

• May 4, 2008

• #3

Wouldn't shorty headers work with his O/R pipe better than long tubes?

 

four six

Member

Jan 19, 2006

506

2

18

Hobart, IN

May 4, 2008

#4

• May 4, 2008

• #4

Yeah but shorties are a waste, and for just about the same price you can get LTs.

 

laserstang21

New Member

Feb 4, 2007

79

0

0

luling, La

May 4, 2008

#5

• May 4, 2008

• #5

but if you buy l/t headers you will need to get a new h pipe or have it cut down and made to work

 

S

soonerfever

New Member

Jul 25, 2006

47

1

0

May 5, 2008

#6

• May 5, 2008

• #6

Any tricks to putting them on?

 

four six

Member

Jan 19, 2006

506

2

18

Hobart, IN

May 5, 2008

#7

• May 5, 2008

• #7

skill and patience

 

S

soonerfever

New Member

Jul 25, 2006

47

1

0

May 12, 2008

#8

• May 12, 2008

• #8

four six said:

skill and patience

Click to expand...

Thanks alot for that!

I have heard from a couple of people that you have to drop the tranny because it is in the way? It's doesn't look like it is to me.

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

May 12, 2008

#9

• May 12, 2008

• #9

shorties are a waste of time, effort and money, maybe worth 1-5rwhp on a bolt on car...go with longtubes and dont think twice about it

 

98COBRA281

10 Year Member

Nov 24, 2007

1,348

30

59

Port St. Lucie, Florida

May 12, 2008

#10

• May 12, 2008

• #10

i want headers so bad ...... there the last bolt on I need

 

C

chefalan23

Banned

Jul 29, 2007

18

0

0

May 12, 2008

#11

• May 12, 2008

• #11

unless you are VERY mechanicly inclined, i wouldnt reccomend tackling this yourself. I hope you have a mechanic friend that owes you BIG b/c this is possibly one of the biggest pains in the ass to do on a mustang. also people dont realize how much money is involved in longtubes. figure on about 500 for the headers (assuming you get some cheap like bbk) and if you have to have them installed plan on another 500, then a new midpipe, another 150, plus you are going to need a tune, so thats another 200. so in the end you're looking at 1350 minimum for the whole ordeal. headers are a money pit if you cant do it yourself. if i had the knowledge and the time to install them i would have them cause they sound oh so sweet. they give you a nice midrange punch also. good luck

 

S

soonerfever

New Member

Jul 25, 2006

47

1

0

May 13, 2008

#12

• May 13, 2008

• #12

I have a good friend that is a mechanic and he always lets me use his lift and he always helps. I do not race the car at all. Its just a fun street car that runs well. My stock manifolds are leaking and the ticking noise is driving me crazy. I was looking at some BBK ceramic coated shorties becuase they will bolt up to my O/R H-Pipe. My car sets really low so I don't see spending $500+ on long tubes then beating the crap out of them when driving around. I know they sound and perform alot better because I have a set on my 66. I just don't want to dump that much money in this car. I am hoping to get some tips from the guys who have installed them. Thanks for the help and advice so far.

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

May 13, 2008

#13

• May 13, 2008

• #13

well if your just looking for a replacement go ahead and do shorties...but honestly you mine was well just get replacement stockers because the gain is going to be very very minimal

5.0 mag did a dyno after installing some slp shorties and i think the gain was like 1.5rwhp or something

 

B

blubullett

Member

Jun 22, 2006

535

6

18

Modesto, CA

May 13, 2008

#14

• May 13, 2008

• #14

Go with the ceramic coated bbks, they look nice and will bolt up to your x pipe pretty easily. Probably wont be worth much power though.

 

S

soonerfever

New Member

Jul 25, 2006

47

1

0

May 14, 2008

#15

• May 14, 2008

• #15

What about dropping the tranny? Do you have to?