• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AC NOT BLOWING

  • Thread starter Thread starter stang0f87
  • Start date Start date Jun 19, 2009
S

stang0f87

Member
Aug 16, 2004
102
0
16
Fort Smith, AR
Jun 19, 2009
#1
  • Jun 19, 2009
  • #1
I can hear the blower running. Its fine. The problem is air isn't coming out all the vents. Can't get anything out of the center console or driver side. Strange. Blows fine thru defroster, floor, and passenger side. Whats the deal?
 

LX302

Stanger
Founding Member
Feb 29, 2000
728
6
19
Bethlehem PA
Jun 19, 2009
#2
  • Jun 19, 2009
  • #2
Look up under the dash near the center console. See if all your vacuum lines are attached. The yellow line should be hooked up into a metal cylinder attached to the console frame, it sometimes comes undone and will cause the problem you described.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Jun 19, 2009
#3
  • Jun 19, 2009
  • #3
Diagrams courtesy of Tmoss & Stang&2birds


See the following website for some help from Tmoss (diagram designer) & Stang&2Birds
(website host) for help on 86-95 5.0 Mustang wiring Mustang FAQ - Engine Information Everyone should bookmark this site.


Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 91-93 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/91-93_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 94-95 5.0 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/94-95_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pinout
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif
 
You must log in or register to reply here.

Similar threads

7
A/C blowing defrost
  • 70/04mach1
  • Jul 20, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
267
1996 - 2004 SN95 Mustang -General/Talk- Jul 21, 2025
Noobz347
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
249
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
9
1998 V6 - What is this line called?
  • 98_Stanger
  • Aug 10, 2025
  • SN95 V6 Mustang Tech
Replies
5
Views
244
SN95 V6 Mustang Tech Aug 10, 2025
nickyb
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
206
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
C
Engine Code 94 and 13
  • CmdrDerp
  • Nov 3, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
317
Fox 5.0 Mustang Tech Nov 4, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?