• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

air screws

  • Thread starter Thread starter 87Mustang351
  • Start date Start date Sep 11, 2007

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Sep 11, 2007
#1
  • Sep 11, 2007
  • #1
hey guys just wondering what i should set my air screws at on my carbarator, jsut rebuilt it and i am not to sure!

and also what is hould gap my plugs at, and set my inital timing...thanks a million todd, this is all for at the track this weekend
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Sep 12, 2007
#2
  • Sep 12, 2007
  • #2
if you mean the A/F mixture screws, gently seat them, then back them out 3 turns, start car and let warm up. while idling, screw in each 1/4 turn and check for idle speed drop, once a drop is detected backout each screw 1/8 turn. make sure you screw them in and out evenly
 

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Sep 12, 2007
#3
  • Sep 12, 2007
  • #3
u mean screw them in as far as they go then back them out 3 turns, start the car turn them a 1/4 or untill idel drop then set them foward a 1/8 of a turn?
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Sep 12, 2007
#4
  • Sep 12, 2007
  • #4
87Mustang351 said:
u mean screw them in as far as they go then back them out 3 turns?
Click to expand...

yes, gently don't force them.

start the car turn them a 1/4 or untill idel drop then set them foward a 1/8 of a turn?
Click to expand...

yes, 1/4 turn clockwise. once idle drops 1/8 turn counterclockwise
 

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Sep 12, 2007
#5
  • Sep 12, 2007
  • #5
ok thanks alot man !
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Sep 12, 2007
#6
  • Sep 12, 2007
  • #6
If you are going to be running your nitrous remember to gap plugs 32-36 thou. If you run N/A then you could gap them more like 45 thou
 
You must log in or register to reply here.

Similar threads

Engine Are These rings OK?
  • PonyGTrider
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
343
Fox 5.0 Mustang Tech Sep 26, 2026
PonyGTrider
P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
179
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
M
Idle control problems
  • miser143
  • Aug 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
213
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 29, 2026
DadLife0724
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
731
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?