Alignment Question.

screw shims, MM C/C FTW

Yup, been there done that. Get the CC plates and get it aligned.

On a side note, how the heck can they do a 4 wheel alignment on a solid rear axle car?

cc should fix it but Tell them not to damage them when they adjust them. Myne were adjusted with a hammer..

there you go problem solved.

the rear can be aligned if you have adjustable control arms. they adjusts the pinion angle.

Yes, however, pinion angles have nothing to do with with wheel alignment. So again, there is no way to do a 4 wheel alignment on our cars. If they try to sell you one they are ripping you off!

I know most of the newer machines do laser alignment on all 4... correct they can't be adjusted, but they still give you the numbers.

The Ford garage wanted to drill new rivet holes for mine to get it in spec.... I added plates instead..

What specs are you setting it to??? I need to have mine done this year also... I read up a little on this link awhile ago...

http://forums.stangnet.com/696827-just-got-my-maximum-motorsports-c-c-plates.html

FWLIW I went with the specs MM listed in their CC instructions and have been happy.

Redline_351R said:

Thanks guys, I am going to order the CC Plates soon and get it all into spec so my fronts dont get worn down like the last set that came on the car when I got it.

Click to expand...

I bought the Steeda 4-bolt aluminum plates because they are the SEXIEST, well they worked for me and couldnt be happier