• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Ambient Lighting Kit Install

  • Thread starter Thread starter klaw
  • Start date Start date May 12, 2008
  • 1
  • 2
Next
1 of 2 Next Last

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 12, 2008
#1
  • May 12, 2008
  • #1
Anyone have the PDF instructions for installing the 2008 ambient lighting kit (PN: 8S4Z-13E700-AA)? I'll be installing it in an '07 GT.
 
A

ARTTII

New Member
Jan 13, 2004
272
2
0
Detroit, MI
May 12, 2008
#2
  • May 12, 2008
  • #2
Is that the accessory one? Or a retrofit of the OEM factory option? sorry I don't have the pdf just wondered
 
T

tomredfiregt

New Member
Jun 3, 2006
16
0
0
Lynnwood
May 13, 2008
#3
  • May 13, 2008
  • #3
Try this thread:
http://forums.bradbarnett.net/showthread.php?p=5495288
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 13, 2008
#4
  • May 13, 2008
  • #4
It's the accessory one (doesn't have the cupholder light ring - just an LED) and only light bars for the front footwells. If I like it, I'll expand it to the rear and possibly the trunk and engine bay. Should be able to upgrade the console later as well once I've seen how the '08's look.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 13, 2008
#5
  • May 13, 2008
  • #5
tomredfiregt said:
Try this thread:
http://forums.bradbarnett.net/showthread.php?p=5495288
Click to expand...

Thanks for the link Tom - just what I was looking for. I see your location is Lynnwood (WA I assume). I bought my car in Lynnwood and drove it back to Calgary. Hope to get back down that way this summer.
 

xxrequiemxx

Member
Aug 23, 2001
239
0
16
Long Island, NY
May 13, 2008
#6
  • May 13, 2008
  • #6
I dont know guys.... I think you might be able to do this cheaper using after market accessories and not buying from Ford directly.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 13, 2008
#7
  • May 13, 2008
  • #7
xxrequiemxx said:
I dont know guys.... I think you might be able to do this cheaper using after market accessories and not buying from Ford directly.
Click to expand...

Maybe - I know I can buy single color LED light bars much cheaper and could cobble the harness/switch etc together. This kit has the 7 color scrolling option and OEM appearance. At an all in cost of $230 it's not a bank-breaker (to be honest it was an impulse buy at the parts counter ). Will let you know how it looks once it's installed.
 
T

tomredfiregt

New Member
Jun 3, 2006
16
0
0
Lynnwood
May 16, 2008
#8
  • May 16, 2008
  • #8
The difference with this kit is it comes with a round button that you have to drill your center console to mount it. You also have to drill small holes in your cupholder for the LED lights.
I spent extra $$ (too much I admit) and got the stock 08 center console plastic, cupholder, and button from the dealer (Harris Ford) and wired it so it looks very OEM. Mine now has the light ring in the cupholder and square button that looks stock.
 
T

tomredfiregt

New Member
Jun 3, 2006
16
0
0
Lynnwood
May 16, 2008
#9
  • May 16, 2008
  • #9
And yes I am in Lynnwood, WA.
Check out http://www.emeraldcitymustangs.com

We are a free club, and meet every Friday during the summer in Lynnwood at 44th and 196th and attend many events and car shows.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 16, 2008
#10
  • May 16, 2008
  • #10
Do you mind posting what the extra $$ were? Did you put lightbars in the rear footwells as well (I think the '08's have those??)? I'm not fussy about how the square switch looks on the console so will mount my round switch inside the console box.

Lynnwood is about 660 miles from here but I hope to get down your way once this summer - will try to drop in on your Friday event.
 
T

tomredfiregt

New Member
Jun 3, 2006
16
0
0
Lynnwood
May 16, 2008
#11
  • May 16, 2008
  • #11
The kit doesn't come with light bars for the back seats. I didn't really care about that since I have a convertible and the back seats are small anyway.
I got mine from the ford dealer for $270 plus tax.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 16, 2008
#12
  • May 16, 2008
  • #12
tomredfiregt said:
The kit doesn't come with light bars for the back seats. I didn't really care about that since I have a convertible and the back seats are small anyway.
I got mine from the ford dealer for $270 plus tax.
Click to expand...

$270 for the kit plus console, cup holder, and square button or $270 for just the extras to make it look OEM?
 
T

tomredfiregt

New Member
Jun 3, 2006
16
0
0
Lynnwood
May 16, 2008
#13
  • May 16, 2008
  • #13
Sorry it is $270 for the lighting kit
The center console is $256 (top half of it)
Cupholder $19
Button $24
And I think the harness is $160. This has the clear ring that goes in between the console and the cupholder. It has LEDs attached to it but I couldn't make those work so I just taped the ones from the lighting kit to the clear plastic. Works ok.
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 17, 2008
#14
  • May 17, 2008
  • #14
tomredfiregt said:
Sorry it is $270 for the lighting kit
The center console is $256 (top half of it)
Cupholder $19
Button $24
And I think the harness is $160. This has the clear ring that goes in between the console and the cupholder. It has LEDs attached to it but I couldn't make those work so I just taped the ones from the lighting kit to the clear plastic. Works ok.
Click to expand...

Yikes! That is a bit pricey.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
May 17, 2008
#15
  • May 17, 2008
  • #15
I was looking at buying one of those but than when I found out it wasn't the real deal I wad disappointed.
 

blackraven

New Member
Aug 19, 2006
19
0
0
Trenton, NJ
May 17, 2008
#16
  • May 17, 2008
  • #16
Did you splice into the power wire, or run it to the fuse box?
 

redredline

New Member
May 17, 2008
8
0
0
May 17, 2008
#17
  • May 17, 2008
  • #17
tomredfiregt said:
Sorry it is $270 for the lighting kit
The center console is $256 (top half of it)
Cupholder $19
Button $24
And I think the harness is $160. This has the clear ring that goes in between the console and the cupholder. It has LEDs attached to it but I couldn't make those work so I just taped the ones from the lighting kit to the clear plastic. Works ok.
Click to expand...

i've definitely seen cheaper...
 

klaw

Member
Oct 11, 2007
343
0
16
Calgary, Alberta, Canada
May 17, 2008
#18
  • May 17, 2008
  • #18
blackraven said:
Did you splice into the power wire, or run it to the fuse box?
Click to expand...

On my '07 GT there is a spare harness (grey unused connector) under the console. The harness has a constant 12v, a keyed 12v, and an illumination source (comes on with the light switch and goes through the dimmer). This spare harness is very handy for these types of low current draw mods. I haven't installed the kit yet but don't know why that harness couldn't be used.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
May 18, 2008
#19
  • May 18, 2008
  • #19
klaw said:
On my '07 GT there is a spare harness (grey unused connector) under the console. The harness has a constant 12v, a keyed 12v, and an illumination source (comes on with the light switch and goes through the dimmer). This spare harness is very handy for these types of low current draw mods. I haven't installed the kit yet but don't know why that harness couldn't be used.
Click to expand...

I've seen the same plug and figured it was the plug they used for the ambient lighting kit when they come as a factory option.
 
A

ARTTII

New Member
Jan 13, 2004
272
2
0
Detroit, MI
May 18, 2008
#20
  • May 18, 2008
  • #20
Do you guys have manual transmission cars? I think that plug is for the auto shifter... At least that was my best guess when I came across it when I had the console top off.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
11
Views
298
Digital Self-tuning Forum Jul 16, 2026
fasterthangas
F
2
Ambient temperature sensor
  • 2003 mustang gt
  • Jul 11, 2025
  • SN95 4.6L Mustang Tech
Replies
1
Views
125
SN95 4.6L Mustang Tech Jul 11, 2025
Noobz347
Fox Valve Spring Kit PAC-1219X. Help finding needed additional parts.
  • 93gtmustang
  • Jul 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
254
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 31, 2026
93gtmustang
M
Bad PCM?
  • MrPuffels
  • Jul 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
92
2005 - 2009 Specific Tech Jul 22, 2026
MrPuffels
M
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
146
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?