anyone running a trick flow cam tfs51402001

T

Travis-Homuth

New Member

Feb 16, 2008

17

0

0

Oct 22, 2008

#1

• Oct 22, 2008

• #1

I am going tobe getting a trick flow track max cam soon. anyone out there running it now or in the past that could help out with a few questions would be a big help. did you have any piston to valve clearance trouble? if so how did you resolve it? my car is a 90 mustang with a 5 speed. Summit has it listed as non computer compatible but, I thought as long as you have 112 lobe sep or more it was good to go. this car will be driven to the track. you guys have much drivability problems with it? thanks for any and all help

 

cenok is family

15 Year Member

Jun 25, 2003

1,409

69

79

Norman, Ok

Oct 22, 2008

#2

• Oct 22, 2008

• #2

that's just the tfs stage 2 cam, i don't have one, but you should be able to run that with a computer. again i don't have one but i'm fairly certain you'll have some ptc issues without properly notched pistons.

 

T

Travis-Homuth

New Member

Feb 16, 2008

17

0

0

Oct 22, 2008

#3

• Oct 22, 2008

• #3

thanks for the reply. the piston to valve clearance is what i am afraid of too.

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Oct 22, 2008

#4

• Oct 22, 2008

• #4

what kind of heads and intake are you running?

thats a pretty mean cam, lopes hard..

 

ls1beater4eva

New Member

May 13, 2005

334

0

0

mooresville

Oct 22, 2008

#5

• Oct 22, 2008

• #5

the tfs 2 cam works fine with twisted wedge heads and a factory comp

 

T

Travis-Homuth

New Member

Feb 16, 2008

17

0

0

Oct 22, 2008

#6

• Oct 22, 2008

• #6

I have stock heads that, after a head gasket blew, i had a shop put in new springs, retaiers, valve job with stem seals and milled .030 .just got the heads back yesterday. I will also be installing an explorer gt 40 intake with the 19 lb explorer injectors. the car had the B303 cam when i bought it. after talking to a few other guys about the cam, i think im going to go with the F303. ford said the RPM range on that cam is 3000 to 6500. I know it will idle ruff. Still kind of wondering how it will drive in the lower rpm range. at least with the F303 piston to valve clearance should be ok.