Progress Thread Back to buying sh_t..er stuff.

  • Sponsors(?)


CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,492
13,618
234
62
Birmingham, al
m.imdb.com
Sigh,..they're just long assed SS 1/4" socket head bolts. Exactly like the ones on the Monster, exactly like the ones you can get at any nut/bolt house in your city.
 

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
They are just skinny in the center to make it easier for China to skimp out on the amount of metal used and save money. Worst case, get some 1/4 20 (I think) all thread and some nuts and make your own.
 

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
I started writing this last night and the PC crashed. Anyway, worked on my son's 2005 Volvo XC90 over the weekend. I already had put a new balljoint and lower control arm on the passenger side, but due to the fact that it took all damn day to figure out how to get the new ball joint in the spindle, we had to postpone doing the driver side. The V is backward from everything I've worked on. The ball joint is pressed into the bottom of the spindle. Volvo makes a special $150 driver to hammer it in. The big Atlas tools ball joint press at Autozone is not supposed to work. After dicking with it all day, I got up Sunday and said WTF and got it and got it in pretty much trouble free.

Fast foward to this weekend. I have all the tools out, start getting stuff apart, use the back joint tool in an all too sketchy manner but again it works with no lost fingers or even any cussing. I tell my boy to replace the control arm while I replace the tie rod end. It's a weird design with a cross bar with two bolts in the front going thru the frame horizontally and one bushing in the rear that is oriented vertically with one bolt thru it. He keeps fussing and sighing and says I give up...can you get this one bolt started. SO I make fun of him and get under there.....and start cussing. I say give me my glasses. I look for a minute or two then realize one of the bolt holes is NOT TAPPED. WTF! I guess that's the game of buying things in the economy listing at RockAuto. :shrug:

I've got the correct tap, so take it off and try to tap it. Obviously that cross bar is hardened and it's harder than the cheap ass Chinee tap set I have. I tried to ream the hole to get the tap started and about the time it finally started to cut a thread, the tap broke!! Then it took me another hour to get the old ball joint out of the control arm. With the volvo setup you have to have a pickle fork or ball joint spreader tool to get it out. There is not any spring force on it to do the regular loosen it and hit the control arm with a hammer. So I had to go to Autozone and rent the spreader tool.

Finished up with a home grown tape measure alignment. It needs tires, so I said it's close enough and we're going to PepBoys Wed to get it aligned and new tires.
But then last night he texts and says the Service Anti Skid System message has come up. No check engine light and I don't think a regular ODBII code reader will tell anything. The only possible correlation is I removed the driver's side anti-lock sensor from the spindle and put it back in. I double checked the wire wasn't being pinched between the strut and the sway bar end link. So I don't know if it is just a coincidence or if I did something and broke that sensor.

The interwebs say the #1 cause is the steering angle sensor ($300+) in the steering column or the vehicle yaw sensor under the passenger seat. More $$$$ freaking money pit. My ex bought this for him without consulting me. I was going to get him a good old Ranger. So happy high school graduation present to my box. 4 new ground grippers and an alignment.

IMG_20190504_163132.jpg
IMG_20190504_163141.jpg
IMG_20190504_163154.jpg
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,223
4,297
203
42
If you have to do a rear wheel bearing sell that pos. Lol

For some reason everything in the rear seizes up. 3 times I've had to remove the whole rear spindle with the axle attached and took them to a truck shop to get them pressed apart. They have huge presses in cages at the semi axle and spring shop i deal with. They thought their press was about to break. My 20 ton couldn't even make it budge.
 
Last edited:

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
What kind of mileage am I expecting the POS rear to sieze? It's got 120k right now. And new tires. And a **** up front end...still. When you hit the breaks it doesn't pull the steering wheel, but crabs left. I am getting another control arm for the driver side and will replace it tomorrow night. Hopefully, it's a case of the old one is worse than it looks or maybe in the swap and reswap of control arms, we forget to get it tight.
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,223
4,297
203
42
A customers was seized at 60+k but the issue was humming from the wheel bearing in the rear. The axle sticks in the hub and bearing assembly making changing the bearing a real PITA.

Crabbing left could be that left control arm bushing.
 

Boostedpimp

10 Year Member
May 8, 2003
987
314
94
NJ
They are just skinny in the center to make it easier for China to skimp out on the amount of metal used and save money. Worst case, get some 1/4 20 (I think) all thread and some nuts and make your own.
FYI, I was able to get the bolts from Holley. Apparently they are identical or a china knock off of there sniper valve covers
 

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
A customers was seized at 60+k but the issue was humming from the wheel bearing in the rear. The axle sticks in the hub and bearing assembly making changing the bearing a real PITA.

Crabbing left could be that left control arm bushing.
I changed the DS control arm and it still crabs left but not as bad. Kid is busy so don't know when I'll get eyes on it again. I wonder if it's a rear control arm or a frozen front caliper.
 

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
The brake (I think I spelled it break in earlier post...haha...it's a break(ed) down POS) pedal is also very spongy. Fluid is clear, they must have flushed it at the 100k service before exwifey bought it. It's pretty near full. So I am thinking some caliper monkey business. But, again, the kid who complains that it creaks, cracks, pops, the headliner has disintegrated, and he is basically embarrassed as :poo: to drive it, doesn't have time to come over and figure what the heck is wrong with it.

:ot:
 

darkfader

Mustang Master
Feb 16, 2017
243
319
83
44
Davis, WV
Nice work so far Droopie. I don’t envy your wiring project at all. I hope to get by with mostly factory replacement harnesses for everything I need to do.

I will add though, when it’s time for insurance, definitely check with Hagerty. I use them for my 64 impala. As many miles as I want and insured at 45k replacement value. All they wanted was pictures and proof of my garage and it costs me just under $300/yr. I’ll put the stang on there once it’s roadworthy.
 

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
Didn't you used to have a 4i'd fox body mustang at one time?:p
Ha Fffing Ha. I am just waiting to get past the 5 months of below 80 weather so it will be 95 in the garage so I can get started back on it, smarty pants!

I wrote over on FEP, I really want to trade this for a roller (maybe with a 6pt roll bar) so my bro and I can go drag racing again. I could do it in this one, but I fear, it would only take a few weeks before the interior is gutted and the money pit opens.

But with the rusted ass roof, and other issues, I could start with it as is. I know to have a chance bracket racing it needs an auto, but I just don't want to swap pedal boxes.
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,492
13,618
234
62
Birmingham, al
m.imdb.com
I am just going to tie the clutch pedal up out of the way when i do the 4R70W swap..
Now you know that ain't gonna be right Vern.. Its not like you can rotate the thing out of sight.

You know, you can just remove the clutch pedal and put a sleeve or something back in place to take up the gap..there's always that possibility...

Or you could just leave a clutch pedal smashed against the firewall. Whatever pushes the " that'll do pig, that'll do" button for you. ;)
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,492
13,618
234
62
Birmingham, al
m.imdb.com
Ha Fffing Ha. I am just waiting to get past the 5 months of below 80 weather so it will be 95 in the garage so I can get started back on it, smarty pants!

I wrote over on FEP, I really want to trade this for a roller (maybe with a 6pt roll bar) so my bro and I can go drag racing again. I could do it in this one, but I fear, it would only take a few weeks before the interior is gutted and the money pit opens.

But with the rusted ass roof, and other issues, I could start with it as is. I know to have a chance bracket racing it needs an auto, but I just don't want to swap pedal boxes.
Ugghh:nonono:.......bracket racing...the words leave a bad taste in my mouth.
Why on earth would you even bother building a car for this? You have a daily driver.....put that bitch in d and go racing.

The slowest car on the planet is all that's required to win in bracket racing..No tire spin, no inconsistency based on the tune, or the air density....just a mind numbing 20 second wait to get to the finish line,........and a reason for the handful of spectators that are watching to go to the bathroom.
 

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,047
5,956
204
31
Hillsborough county
Now you know that ain't gonna be right Vern.. Its not like you can rotate the thing out of sight.

You know, you can just remove the clutch pedal and put a sleeve or something back in place to take up the gap..there's always that possibility...

Or you could just leave a clutch pedal smashed against the firewall. Whatever pushes the " that'll do pig, that'll do" button for you. ;)
I only have severe OCD with some things and a pedal held out of the way is not one of them, I never want to change that assembly out again. so here comes the ziptie squad to get er done.
unless it keeps messing with my foot when I have to fidget or twitch, which i do more often then i like to admit... then it will have to come out, or i will have a nervous breakdown whilst driving
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,492
13,618
234
62
Birmingham, al
m.imdb.com
I only have severe OCD with some things and a pedal held out of the way is not one of them, I never want to change that assembly out again. so here comes the ziptie squad to get er done.
unless it keeps messing with my foot when I have to fidget or twitch, which i do more often then i like to admit... then it will have to come out, or i will have a nervous breakdown whilst driving
"Whilst driving?"
Do you have a Jaguar in your driveway too? The one in My driveway has a book in it that has that word usage constantly.
 
  • Surprised
Reactions: General karthief

droopie85gt

Hookers and Beer for life!
Dec 26, 2016
1,156
821
143
Cordova, TN
Ugghh:nonono:.......bracket racing...the words leave a bad taste in my mouth.
Why on earth would you even bother building a car for this? You have a daily driver.....put that bitch in d and go racing.

The slowest car on the planet is all that's required to win in bracket racing..No tire spin, no inconsistency based on the tune, or the air density....just a mind numbing 20 second wait to get to the finish line,........and a reason for the handful of spectators that are watching to go to the bathroom.
You are correct. But heads up racing is about who has the biggest wallet. Hell the Pro Stock champion Tanner Gray jumped to NASCAR this year....which is like jumping off the Titanic onto the Andea Doria. But there are 2 8th mile tracks within 45 miles of home that regularly pay between 1000-2000 to win.

Now you know that ain't gonna be right Vern.. Its not like you can rotate the thing out of sight.

You know, you can just remove the clutch pedal and put a sleeve or something back in place to take up the gap..there's always that possibility...

Or you could just leave a clutch pedal smashed against the firewall. Whatever pushes the " that'll do pig, that'll do" button for you. ;)
So my question is, can you take the clutch pedal off without taking the whole damn thing out of the dash? I can easily make a spacer to take up the slack.
Or just put a return spring on the clutch pedal and let rednecks scratch their heads.
 
Thread starter Similar threads Forum Replies Date
Mstng93SSP Anyone Else Buy Stuff You Don't Need? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 501
R Please ask wife before buying stuff 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 35
M buying suspension stuff... 1996 - 2004 SN95 Mustang -General/Talk- 0
kalvick Hammer Shifter, Gears, Tranny Cooler - If you have an auto BUY this stuff!! 1996 - 2004 SN95 Mustang -General/Talk- 8
TRIBALMAN23 Anyone know about these? Do i need to buy extra stuff? 2005 - 2009 Specific Tech 7
J fitment questions before i buy stuff ( suspension related) Fox 5.0 Mustang Tech 0
B Best place to buy stuff that fits?? Classic Mustang Specific Tech 3
Project 77 lesson learned: don't buy used stuff 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
xoxbxfx 66 + 4.6 + AC? Can you buy the underdash stuff? Classic Mustang Specific Tech 2
badstang123 Where to buy ignition tune up stuff 1994 - 1995 Specific Tech 3
D Would you buy stereo stuff from ebay? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
CBZGT50 Gear and rear set ups. Where to buy good stuff Fox 5.0 Mustang Tech 2
S buying intake hae questions on stuff??? 1994 - 1995 Specific Tech 6
9 5 Lug Front Conversion SN95 Stuff Where To Buy? Fox 5.0 Mustang Tech 9
6 Is it possible to buy stuff cheap anymore?? Classic Mustang Specific Tech 10
FrdMustangCpe Looking for some stuff to buy Fox 5.0 Mustang Tech 5
P Best Place to Buy This Stuff??? SN95 4.6L Mustang Tech 5
vizionblind Ok, I need some help buying stuff for V6 2000 mustang. *newbie* 1996 - 2004 SN95 Mustang -General/Talk- 11
H How to know what year Fuel Pump to buy? 1965 - 1973 Classic Mustangs -General/Talk- 1
G What Tuner to Buy SN95 4.6L Mustang Tech 0
Prerunner5.0 Buying a 5.8 swapped Stang, anything I should be aware of? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 34
R Expired Want to buy I-6 Engine Mounts 69-72 250 I6 Drivetrain Parts 0
revhead347 Buying Car Parts is somewhat pleasant now 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
FoxMustangLvr What car parts are you buying with your stimulus check? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 71
9 Should i buy a 3v 2005 - 2014 S-197 Mustang -General/Talk- 2
wicked93gs Is there somewhere to buy these braces? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 16
E WTB/Trade WANT TO BUY: ALMOND FOXBODY Fox Body Mustangs For Sale (1979-93) 0
B Buying a Fox this weekend. Can you estimate HP/Times? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
M Buying a used Mustang - how do you know what options it has? 2015+ (S550) Mustang -General/Talk 2
C 331 or 347 Kit, Where to buy 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
1 Fuel Gas Tank Replacement Parts Checklist - Where to buy? - 1987 Notchback Preservation Fox 5.0 Mustang Tech 11
B Where can I buy a gear shift knob for my 2006 with auto tranny? 2005 - 2009 Specific Tech 1
B WTB/Trade Wanted to Buy. 87-93 coupe rear seats. Interior Exterior Parts 1
Sycostang67 Looking to buy, what to look for? 2005 - 2014 S-197 Mustang -General/Talk- 7
gonzo.ayres looking to sell my Mustang ii and buy an sn95. Anything to look for and look out for? 1996 - 2004 SN95 Mustang -General/Talk- 10
gonzo.ayres looking at selling my mustang ii and buying an s197. Anything i should look for and look out for? 2005 - 2009 Specific Tech 6
usaf_branham Thinking about buying my old car back 1996 - 2004 SN95 Mustang -General/Talk- 11
Schnelly Would you buy a used GT500 Supercharger? 2005 - 2014 S-197 Mustang -General/Talk- 1
F Where to buy A9L??? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
F Best place to buy a new or rebuilt A9L? Digital Self-tuning Forum 7
N Engine Need Help - Looking to buy Fox 5.0 Mustang Tech 13
S Would you buy a Mustang that you know had been raced? 2005 - 2014 S-197 Mustang -General/Talk- 2
DemonGT How to buy new? 2015+ (S550) Mustang -General/Talk 10
paddyrk Interior and Upholstery Where can I buy rear seats?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
C What's it Worth? should i buy this fox body and what should i ask What is it Worth?!?!? 6
M Worth Buying 2007 GT Premium? 2005 - 2014 S-197 Mustang -General/Talk- 3
S Was buying this car a huge mistake??? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 53
Noobz347 Buying Your First Car - How Dealerships Rip You Off 2015+ (S550) Mustang -General/Talk 0
N Deciding on which rims and tires to buy so there is no gap in the wheel well. 1996 - 2004 SN95 Mustang -General/Talk- 0
S New Guy about to buy The Welcome Wagon 1
Similar threads