• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Bad starter? Relay? Both?

  • Thread starter Thread starter SouthpawShootr
  • Start date Start date May 20, 2007
S

SouthpawShootr

New Member
Mar 31, 2005
11
0
0
May 20, 2007
#1
  • May 20, 2007
  • #1
Story of my life. I took my 90 5.0 LX Sport out for a short drive today. Everything was fine. Later when I went out to run a few errands I started it up and it started making this godawful screeching noise. The engine was running, so I turned it off and removed the key. Noise was still there. Popped the hood and the engine was still running. Not cranking, running. Had to disconnect the battery to get everything to stop. When I reconnected it, the screeching sound again started in. There was a slight odor of something burning as well. I did not allow this to continue, but it did take me a few minutes to disconnect the battery when this first happened. My father told me that it sounds to him like the starter motor isn't disengaging.

I poked around this forum (which has been so helpful in the past) and really haven't matched the symptoms. One close contender eventually found his problem to be a starter relay. Well, I replaced that relay with a brand new Ford factory part about a month or so ago b/c the original went bad and none of the electrical stuff in the car wouldn't work. Cured the problem and it worked like a champ until today.

I'll add that, aside from the aforementioned relay problem, this car has always started first attempt. No grinding or any other abnormal noises. Certainly nothing like it was doing today. This isn't a daily driver, but more like my hobby/weekend car.

Is it possible that the starter is bad and has also wiped out my new relay? In other words, should I order a new relay when I get the starter?
 

Aryan15

Member
Sep 22, 2003
236
0
17
CA
May 20, 2007
#2
  • May 20, 2007
  • #2
I would start by replacing the ignition switch. You have to able to turn off the car.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
May 20, 2007
#3
  • May 20, 2007
  • #3
If one thinks the starter is continuing to crank, check for 12 volts on the starter cable side of the solenoid. A latched solenoid will allow the starter to turn with the ignition off.
If there is 12 volts at this wire, check the small wire at 12 o'clock on the solenoid. If this is present, look for a shorted S-terminal wire between the clutch switch and the solenoid (this assumes the clutch switch functions as it did originally).

If you think the engine was actually running, as Aryan said, the ignition switch is a real nice place to start.

Good luck.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
299
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
306
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
S
All power lost at crank
  • saf_blu302
  • Mar 7, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
197
1994 - 1995 Specific Tech Mar 12, 2026
General karthief
Electrical Fuel pump relay pin question
  • Shopteach
  • Apr 4, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
180
Fox 5.0 Mustang Tech Apr 4, 2025
AeroCoupe
Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
206
SN95 4.6L Mustang Tech Feb 27, 2026
BrandonMP
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?