Hey everyone my name is Shane from Dayton rocking a 1977 black Mustang ii. She has a few bells and whistles. Next year we are gonna do some racing and it's time to get her ready. She needs a bit of work but we can play a bit until then.
302
Demon 750cfm carb
Edelbrock rpm air gap
1 inch spacer
Unknown cam pulls hard from 3200 and up
Ported 351 heads with larger valves
Headman headers
Msd6al with duraspark 2
C4 B&m rachet shifter reverse valve body
4.11 gear
N.O.S cheater with 150 shot
Bfgoodrich Radial t/a 235/60r15
Haven't done anything with the nitrous yet I want to make sure she is ready for it. Probably gonna pull the heads off and take a look at everything. She should be able to spray a 150 on a window switch set up from 3200-6000.
Hopefully she will see 12s in the quarter mile. I still need to see if the timing is right because she feels a little sluggish right after you stomp it and she doesn't like to start cold . Any tips let me know.
302
Demon 750cfm carb
Edelbrock rpm air gap
1 inch spacer
Unknown cam pulls hard from 3200 and up
Ported 351 heads with larger valves
Headman headers
Msd6al with duraspark 2
C4 B&m rachet shifter reverse valve body
4.11 gear
N.O.S cheater with 150 shot
Bfgoodrich Radial t/a 235/60r15
Haven't done anything with the nitrous yet I want to make sure she is ready for it. Probably gonna pull the heads off and take a look at everything. She should be able to spray a 150 on a window switch set up from 3200-6000.
Hopefully she will see 12s in the quarter mile. I still need to see if the timing is right because she feels a little sluggish right after you stomp it and she doesn't like to start cold . Any tips let me know.