• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

black smoke after intake install

  • Thread starter Thread starter jaackal
  • Start date Start date Oct 23, 2004
J

jaackal

New Member
May 12, 2003
402
0
0
NJ
Oct 23, 2004
#1
  • Oct 23, 2004
  • #1
i installed a cobra intake with an adjustible fuel pressure regulator and after i installed everything i went to start it up and it sounded like i had a heavy duty cam in it and it blowing out black smoke? any ideas what this may be? the idle was normal but sounded like it was missing. any ideas?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 23, 2004
#2
  • Oct 23, 2004
  • #2
what is the PCV set up?
 
J

jaackal

New Member
May 12, 2003
402
0
0
NJ
Oct 23, 2004
#3
  • Oct 23, 2004
  • #3
the goes from the lower intake to a fitting on the upper intake on the right hand side
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 23, 2004
#4
  • Oct 23, 2004
  • #4
so it is all up to par? (that is what i was asking, in a round about way).
 
R

Ray@VSK

New Member
Aug 27, 2004
355
0
0
Oct 23, 2004
#5
  • Oct 23, 2004
  • #5
Sure the fuel pressure regulator is almost all the way down ?
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Oct 23, 2004
#6
  • Oct 23, 2004
  • #6
that is a sure sign of a huge vacuum leak. get some starting fluid and spray it on all the gasket mating surfaces and hoses that you messed with while it is running. if it revvs up while spraying, you found your leak.
 
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
582
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
236
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
236
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
703
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
649
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?