• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

blower/supercharger on a 351w automatic??

  • Thread starter Thread starter 69shocktower
  • Start date Start date Jul 13, 2008

69shocktower

Active Member
Nov 5, 2003
173
21
39
Dakotas
Jul 13, 2008
#1
  • Jul 13, 2008
  • #1
Ive heard the whipple twin screws are the best blower. Anyone out there with blowers on a small block?

Is this possible? Only thing im worried about is the tranny kickdown. I had enough trouble just putting an edelbrock carb on it. Would I have to fab up a custom kickdown rod and linkage or do they make em?
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Jul 14, 2008
#2
  • Jul 14, 2008
  • #2
Whipples are good, but unless you are plannning to make your own kit, Whipple does not offer one for a Ford(only Chevy), I tried a while back.
 

blown65

Founding Member
Jul 7, 1999
1,938
4
39
Queen Creek Arizona
Jul 14, 2008
#3
  • Jul 14, 2008
  • #3
BDS makes a special valve for the modulator also.
 

jerry S

New Member
Sep 3, 2003
1,365
1
0
52.22N 5.12E
Jul 15, 2008
#4
  • Jul 15, 2008
  • #4
twin screw blowers based on the lysholm design are best. The boost is there the second you touch the gas. they are the most efficient and do not add too much parasitc drag. Whipple and Kenne Belle are two manufacturers making twin screw blowers. Unfortunatlely, they do not make kits for a 351w. I corresponded with Kenne Bell on the matter and found you could fit a whipple to a 351w if you had EFI and the right lower intake manifold. I am informed that a correct intake would come off an F150 Lightning.

Roots blowers give you instant on boost but they are terribly inefficient and die out at higher rpms/speeds.

Centrifugal blowers function and perform a lot like a turbocharger only they use a belt to spin the impeller and not exhaust gases. you might see some lag but when it kicks in it keeps on going. These are very efficient and do not create the kind of parasitic drag a roots blower does. Paxton makes a centrifugal blower for a carbed 351w. If you have an auto and are worried about the turbo-esque lag, you could compensate with an appropriate stall converter. I think the boost comes on like around 2500-3000 depending on the blower. With a 3000 stall converter, you would be right on the money.
 
You must log in or register to reply here.

Similar threads

0
In need of some advise!
  • 01slvrstang
  • Apr 17, 2020
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Apr 19, 2020
AutodesignJohn
A
3
New Member: 1978 M II Mach I
  • 351MooseStang
  • May 24, 2019
  • 1974 - 1978 Mustang II Talk & Tech
Replies
12
Views
3K
1974 - 1978 Mustang II Talk & Tech May 30, 2019
351MooseStang
3
T
351w Build Questions In A Sn95
  • tyboudreau
  • Oct 14, 2017
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 15, 2017
tyboudreau
T
S
For Sale 2003 Cobra Redfire Convertible
  • SpectorV
  • Feb 20, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
5K
SN95 Mustangs For Sale (1994-04) Feb 20, 2019
SpectorV
S
J
351w swap in 2004 questions (set up like a 95 Cobra)
  • jonathansw1601
  • Mar 24, 2018
  • 1994 - 1995 Specific Tech
Replies
4
Views
3K
1994 - 1995 Specific Tech Jun 28, 2018
jonathansw1601
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?