Bullitt OEM strut tower brace installed

red05bullitgt · May 17, 2008

Guys, here's some pics of my OEM Bullitt STB that I just got from a member on another website.

Anyhow the member and I decided to swap braces, because neither his Bullitt brace was able to fit his GT500 hood, nor was my previous GT500 STB able to clear my stock GT hood.

Needless to say, I couldn't be happier as the Bullitt STB clears both my hood, and OEM intake plenum cover, with no gaps nor slight bulges in my hood whatsoever. I also measured the clearance between my plenum cover, and strut tower brace, and have exactly 1/2" of clearance. I've also noticed that my hood now closes a lot easier too.

Anyway for those who may be interested in purchasing one. KC from Clevenger Ford has them for $144.40. OEM part # 8R3Z 16A200-A

Also, the OEM Bullitt STB is the same brace as: FRPP V6 part # M-20201-F.

And Btw: I'd also like to thank partsbill, for the great heads up, and inspiration

Rocky

View attachment 317640

killrb · May 20, 2008

How do we contact this place that has the braces?

Thanks,
Brandon

klaw · May 20, 2008

Do you happen to know what STB's will clear a Whipple on an '07GT?

red05bullitgt · May 20, 2008

killrb said:
How do we contact this place that has the braces?

Thanks,
Brandon

Brandon, here's the contact link for KC's e-bay store. If you don't see the brace listed, it means their temporarily out of stock. So you'll need to check back often, for new braces to arrive back in stock.

http://stores.ebay.com/ClevengerParts_W0QQdptZ0QQsclZ0QQsspagenameZWD5QQtZkm

red05bullitgt · May 20, 2008

klaw said:
Do you happen to know what STB's will clear a Whipple on an '07GT?

Although the Bullitt brace does clear the OEM intake plenum cover. I'm not sure if it will clear a Whipple or not. If the Whipple sits any higher than the plenum cover, then I would have to say it will not clear.

In the meantime, you could also check Steeda Autosports, Granatelli Motorsports, and BMR fabrication. Perhaps you could contact them, and find out if they have a brace that will clear a Whipple.

Anyway, here's the link for BMR's website:

http://www.bmrfabrication.com/2005MustangCHASSIS.htm

slowstang4.6 · May 20, 2008

There is a guy on the Bullitt forums that has a blower (don't remember whcih one) on his car and he had to do some minor trimming on the underside of the brace but it looks awesome. Gimme a sec I will find the link..

slowstang4.6 · May 20, 2008

Here is the link. The car has a Roush supercharger:

http://www.imboc.com/forums/showthread.php?t=154278

stanmckinney · May 20, 2008

I appreciate the link. The guy says in the item description that he has not tested the fit on a car with the plenum cover. You say it fits OK, right? Any indentions in the hood blanket?

red05bullitgt · May 20, 2008

Stan,

If your referring to Clevenger Ford's description, although KC has not yet test fitted on a car with the plenum cover. He does mention that one of his customers has, in which he has stated, that it does indeed clear the plenum cover.

As for myself, I'm still using the original hood blanket, and so far. I have not noticed any indentation marks yet. But then again, there were already previous indentation marks, when I had used a GT500 strut tower brace, that clearly did not fit my stock GT hood properly.

stanmckinney · May 21, 2008

What year is your car? Apparently the hood blankets were changed, according to the item description, at some point?

partsbill · May 21, 2008

stanmckinney said:
What year is your car? Apparently the hood blankets were changed, according to the item description, at some point?

2007/ up have the new hood insulator that is designed to work with the brace.
ford part# 7R3Z 16738-H

jasonh328 · May 21, 2008

This is the same as the Steeda STB

NastyStang113 · May 21, 2008

I like it. I'll probably elect to get that one or the BMR unit.

red05bullitgt · May 21, 2008

stanmckinney said:
What year is your car? Apparently the hood blankets were changed, according to the item description, at some point?

My car is a 2005 GT, and partsbill is correct. The hood blankets were changed in 2007, however the hood themselves remain unchanged.

NastyStang113 · May 21, 2008

I really don't like the new design of the forum ...

red05bullitgt · May 21, 2008

If you use the Darkfog skin, it's close to the original forum design.

Bullitt OEM strut tower brace installed

red05bullitgt

Member

killrb

klaw

Member

red05bullitgt

Member

red05bullitgt

Member

slowstang4.6

New Member

slowstang4.6

New Member

stanmckinney

red05bullitgt

Member

stanmckinney

partsbill

Member

jasonh328

Member

NastyStang113

New Member

red05bullitgt

Member

NastyStang113

New Member

red05bullitgt

Member

Similar threads

Bullitt OEM strut tower brace installed

Member

Member

Member

Member

New Member

New Member

Member

Member

Member

New Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency