Can An Airaid Cai Fit On A Saleen Series Vi S/c Without Requiring Fabrication Mods ?

I recently came across a couple of images from someone on another forum who claims that an Airaid CAI will fit on a Saleen series VI S/C without having to make any modifications to the inlet tube in order to attach onto the throttle body while also clearing the upper portion of the alternator after being re-positioned with the Saleen alternator re-location bracket..

However I am at a loss as to how the person in question was able to install the Airaid inlet tube without some fabrication mods..

From my understanding.. The Airaid inlet tube will not attach to the throttle body due to the re-positioning of the alternator.. Unless somehow the positioning of the Saleen re-location bracket can be adjusted/lowered ? the only other scenario I can think of in order for the Airaid tube to clear the upper portion of the alternator is by having the alternator re-clocked which I don't think would make any difference anyhow..

Perhaps somebody in this forum can chime in who knows something that I'm obviously either missing or totally unaware of.. Needless to say, I'm really stumped and at a complete stand still.. Anyway, here's the images attached below.. Thanks

-without-requiring-fabrication-mods-13892287_10154495788339267_7441337333413263398_n_zpsrxhwbjxb.jpg
-without-requiring-fabrication-mods-13925356_10154495789929267_8314348966340886407_n_zps6am9oiki.jpg
 
Last edited:
  • Sponsors (?)