Exactly as the title says...my transmisson is on it's way out and needs a rebuild or replaced before it leaves me stranded somewhere...I would rather not take the bell off so I decided to try and loosen the 4 tranny to bell bolts but they are astronomically tight. I've tried a breaker bar with a cheater pipe, an impact gun, and still no avail. They aren't seized up or anything just super super tight. I will heat them up if I HAVE to but I'd rather avoid that...using a torch where gas lines, oil, tranny fluid and everything else is just doesn't sound like the safest thing to do....I've done it many times before but that is my last resort. Any ideas?
Thanks.
Thanks.