Progress Thread can't leave well enough alone...

  • Sponsors(?)


KZGUNS

I can swing up to 11”
Jul 23, 2018
629
259
73
43
chardon, Ohio
Well the results are in. 336rwhp
Not what i had hoped but not disappointed as i had no goal other than to have a fun unique set up. I am slightly skeptical as my first pull spun the tires on the rollers and my buddy who went with me thought there was some spinning even after the tires were sprayed. It was on a Mustang Dyno that as far as i could tell was pretty old and old enough to still be run on DOS and no working printer because "they want 20k to upgrade my system" My buddy who came along told me he knows someone who's 10.50 sec. chevy only turned 440rwhp on the same dyno..... he was supposed to email me a graph etc but that hasn't happened as of yet. I'm kicking myself for not taking a picture but he kinda rushed us out and said I'll email you the data... None of this is an excuse just what i observed. The other place that is 5 min from my house is opening up again soon so i may schedule a time just to see. According to people i know who've been there its much newer and well maintained.
Any thoughts are welcome, the seat of the pants dyno tells me its more, anyone whos went along for a ride seems to think so as well
 
  • Hell Yeah!
Reactions: General karthief

95BlueStallion

Drop into my dm’s gurrrrrl
10 Year Member
Feb 22, 2007
5,711
3,318
214
Cedar Rapids, Iowa
www.goodreads.com
If it’s fun to drive, it’s fun to drive. Dyno numbers aren’t the end all be all. My car was 330/350, and my tuner had guessed it to be over 400. Mine was done on a dynojet, but even so, it’s whatever. Enjoy the car, and that awesome sound it makes!
 
  • Like
Reactions: KZGUNS

KZGUNS

I can swing up to 11”
Jul 23, 2018
629
259
73
43
chardon, Ohio
Some ideas on this ever evolving project. for starters I'm going to add an additional meth nozzle before the blower to cool the blower itself and hopefully increase boost by helping seal the rotors a bit. I ordered a 1.5gph nozzle for this. I'm also thinking about a bigger intake tube, oval 5"x2.5" that'll go over the top of the blower and angle over to the area where the A/c would be on cars equiped. Then use an oval TB. Gotta check hood clearances etc this would probably be a project for next winter but i can get started mocking things up and gathering parts. Who knows maybe I'll get it done sooner...
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,499
13,621
234
62
Birmingham, al
m.imdb.com
Some ideas on this ever evolving project. for starters I'm going to add an additional meth nozzle before the blower to cool the blower itself and hopefully increase boost by helping seal the rotors a bit. I ordered a 1.5gph nozzle for this. I'm also thinking about a bigger intake tube, oval 5"x2.5" that'll go over the top of the blower and angle over to the area where the A/c would be on cars equiped. Then use an oval TB. Gotta check hood clearances etc this would probably be a project for next winter but i can get started mocking things up and gathering parts. Who knows maybe I'll get it done sooner...
You might wanna get a second opinion on that plan. Water dont like to be compressed like air does.

MOF,..water dont like to be compressed at all.
 
  • Like
Reactions: KZGUNS

KZGUNS

I can swing up to 11”
Jul 23, 2018
629
259
73
43
chardon, Ohio
You might wanna get a second opinion on that plan. Water dont like to be compressed like air does.

MOF,..water dont like to be compressed at all.
It’s actually quite common. Prometh actually suggested you do that. I won’t be putting all the meth through it. Most will still be sprayed underneath it.
 

KZGUNS

I can swing up to 11”
Jul 23, 2018
629
259
73
43
chardon, Ohio
Went for quick ride. Looks like about 1psi increase but intake temp came down to 124° and it comes down way quicker! Might just be me but seat of the pants it seems to have more power. Slightly richer. I’ll study the log later and maybe pull a little fuel
 

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,055
5,959
204
31
Hillsborough county
Are you only spraying before the blower now or both?
The pressure increase was expected, you may try swapping the nozzles and spraying the majority ahead of the blower.
 
  • Like
Reactions: KZGUNS

KZGUNS

I can swing up to 11”
Jul 23, 2018
629
259
73
43
chardon, Ohio
Are you only spraying before the blower now or both?
The pressure increase was expected, you may try swapping the nozzles and spraying the majority ahead of the blower.
Before and after. Small 1.5 nozzle before. I suppose I could block off the nozzle under the blower and order a 10gph and swap out the 1.5 and see what happens. Not sure I have the motivation to pull the blower to swap out that nozzle though.
 

2000xp8

SN Certified Technician
Aug 8, 2003
6,835
1,004
194
NJ
The numbers sound about right to me.
Remember it's a mustang dyno.
I'd expect on an older dynojet another 30rwhp or so.
 
Thread starter Similar threads Forum Replies Date
6T9_CHARGER_RT Cant leave well enough alone.... SN95 4.6L Mustang Tech 14
B Fuel Fuel not leaving "second tank" 2005 - 2009 Specific Tech 0
geoklass Cubic inches, don't leave home without 'em... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
M Electrical car is possessed please help was supposed to leave for a 1200 mile trip tody Fox 5.0 Mustang Tech 3
R Engine Pulling Motor leaving in AOD and have a couple questions Fox 5.0 Mustang Tech 1
killer5.0 Paint and Body Plan to put the car on rotisserie next winter. Can i leave interior and glass in the car? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
90sickfox I'm Jus' Gonna Leave This Here... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 27
Z Leaving Exhaust Off 2015+ (S550) Mustang -General/Talk 3
S *urgent* 2011 Mustang (no Cats) P2098 Code, Leave Soon On Road Trip 2005 - 2014 S-197 Mustang -General/Talk- 4
Ben Beck "check Charging System" After Leaving Light On Causing Dead Battery 2005 - 2014 S-197 Mustang -General/Talk- 0
G The Gt350r Startup And Revs Leaving The Richmond Autoshow 2015+ (S550) Mustang -General/Talk 4
CobraPony Programmer Options? Leave It Alone? Or What's A Good One? SVT Tech Forum 2
B Expired Some Brand New Modular Ford Parts That Need To Leave My Shop... Other Classifieds 0
90lxwhite should I leave my 3.73 rear when vortech added? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 21
robbz28 Oh the falling leaves....springs Classic Mustang Specific Tech 25
TenorPlayinGuy Moving out of state. Gotta leave the 87 Hatch behind. Fox Body Mustangs For Sale (1979-93) 4
robertdeuce im in the mood to buy something. leave some suggestions 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 21
Noobz347 Pro-Comp Belt Drive. Live it, Love it, or Leave it? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 25
S Blue Smoke when leaving stop, help diagnose 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
04GTMustang Leaving to the track soon 1996 - 2004 SN95 Mustang -General/Talk- 11
B hey hey, back after my long leave of absence The Welcome Wagon 0
G Universal Wheels / Rims - Love 'em or Leave 'em? Classic Mustang Specific Tech 8
mtaqua thinkin of leaving the windshield molding off, questions Classic Mustang Specific Tech 12
BK_CAULEY I'll just leave this here... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 37
BillyT903 Would debadging an 11 year old silver car leave noticeable tan line? 1996 - 2004 SN95 Mustang -General/Talk- 7
8 87 HOOD Help, Leaving for paint in less then a month! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
Night Shifter should i buy or just leave it 1996 - 2004 SN95 Mustang -General/Talk- 3
94GTLaserRC May be Leaving! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 25
Mileshigh Stang leaves me confused. SN95 4.6L Mustang Tech 16
D My Mustang Is Leaving Tomorrow 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
B Lower trailing arms - DIY or leave to pros? 2005 - 2014 S-197 Mustang -General/Talk- 11
my9302002 Bottom end, redo or leave it alone... Fox 5.0 Mustang Tech 3
kosmos Pic of 2000 mustang GT **Leave spoiler or Take It off** 1996 - 2004 SN95 Mustang -General/Talk- 26
TorqueMonster88 Leaving the stang for a month! SN95 4.6L Mustang Tech 7
dz187 Alternate trac-lok disk stacking & leaving out S-spring when rebuilding questions... Fox 5.0 Mustang Tech 10
lazerred02 Back from Iraq, [email protected] Leave!!! 1996 - 2004 SN95 Mustang -General/Talk- 12
Mustang5L5 Why you shouldn't leave your dog alone inside your car 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
The Green GT What happens if you leave your oil cap off? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
MAC'n89Blckstng Sad day for me, Taking a leave from the mustang world. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 20
M To leave cats on or not 1996 - 2004 SN95 Mustang -General/Talk- 12
fivespeedsteed getting ready to leave the car sit for a few months. what to do... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
pwcracer would you leave in AC system 1994 - 1995 Specific Tech 23
xtweakerx Drag Strip: Leave spare tire? 2005 - 2009 Specific Tech 9
F Pull motor leave tranny. 2.3L (N/A & Turbo) Tech 1
whtpny Leaving Washington headed to Florida tomorrow! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
C Challenged by a 300zx leaving yesterday... 1996 - 2004 SN95 Mustang -General/Talk- 10
B How do I leave the line straight? Fox 5.0 Mustang Tech 12
S College Students Leaving A Stang Behind 1996 - 2004 SN95 Mustang -General/Talk- 21
trav_19 thinking of leaving the stang game 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
drakesdad Leaving the Mustang game....... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 38
Similar threads