• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Car barely running

  • Thread starter Thread starter KamiKaziDK
  • Start date Start date Apr 17, 2006

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Apr 17, 2006
#1
  • Apr 17, 2006
  • #1
Posted this in the 94-95 forum, figured you guys could help too. Ok...so here's the rundown. I was driving home the other night and my car just up and started running like crap, RPMs dropped way low, car was sputtering real bad and backfiring when I'd get heavy on the throttle, within about 20 second of trying to do that just so I could get home since I was only about 5 mi. away...I couldn't get my RPMs over 2k, and they were real spuratic, jumping up and down really fast and then pretty much the car wouldn't get over 15-20mph and was still slowing down, so I pulled into a neighborhood shut it down got a ride home and had it towed the next day. At first I was thinking it was my fuel pump cause I ran out of gas about a month ago(yeah, I know, that's a job for women, but I had a brain fart) so I changed the fuel pump today with a brand new holley 255lph I've had for a little while....exact same problem. The only other thing I think it could be is the tranny going out on me, cause it's slowly been doing that where every so often i drops out of overdrive, or I'll be driving along and it'll drop out of gear. Anyone had this problem before? Need an answer soon, cause I don't wanna be riding my crotch rocket for the larger part of the summer here in Phoenix
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 17, 2006
#2
  • Apr 17, 2006
  • #2
pull the cel codes autozone does it free or click on link to see how to do it with a test light and post codes ...is (cel) check engine light on...

http://www.muscularmustangs.com/test1.php
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Apr 17, 2006
#3
  • Apr 17, 2006
  • #3
No, engine light isn't on. I have no way of even getting it there anyways
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Apr 17, 2006
#4
  • Apr 17, 2006
  • #4
bump, please help I'm ready to go to All Mustang and buy a used tranny, but if it's something simple, I don't want to waste that money
 

bryce93lx

Member
Jan 20, 2006
88
1
19
Luke AFB AZ
Apr 17, 2006
#5
  • Apr 17, 2006
  • #5
does it run in neutral, 5sp or auto, my auto died a death like that but it wasn't a sudden thing i noticed it, and then over about five or six days and it got worse and worse. Is the fluid still red or is metal flake with a burnt toast smell
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 17, 2006
#6
  • Apr 17, 2006
  • #6
What makes you think it's the trans? The car runs fine while not moving, right? Search in here for the link on pulling codes and go from there. These cars are too complicated to not let the puter help you figure out what the issue is.

Good luck.
 

whtpny

New Member
Dec 8, 2002
338
0
0
Spokane WA.
Apr 17, 2006
#7
  • Apr 17, 2006
  • #7
First I would try and find someone with a code reader to borrow. I have seen pending codes come up with no CEL on at all. Could be a lot of things but maybe one of the cats got plugged. I have had this happen all of a sudden on cars before and the engine struggles to run at all. Check the normal stuff such as intake for obstructions. Look for loose connections. If you can give us more specific symptoms other than started running like crap.Was it backfiring at all. Smoking ? Wierd smells?
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 17, 2006
#8
  • Apr 17, 2006
  • #8
no need to use a code reader i posted this link below earlier it describes how to pull cel codes with a $3 test light. but if you need a code reader wal-mart has them for about $25-$30.

http://www.muscularmustangs.com/test1.php
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 18, 2006
#9
  • Apr 18, 2006
  • #9
bill302 said:
no need to use a code reader i posted this link below earlier it describes how to pull cel codes with a $3 test light. but if you need a code reader wal-mart has them for about $25-$30.

http://www.muscularmustangs.com/test1.php
Click to expand...
Bill, I missed your first post - apologies for suggesting for him to search the forum - you already posted a link.
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Apr 18, 2006
#10
  • Apr 18, 2006
  • #10
It's an aode. If I keep it in neutral and try to rev it up, it kinda sputters a little and if I keep it floored it takes it a few seconds to get a little bit above 2k rpms, and it's struggling the whole time. Would the tranny cause it to not be able to rev like that though? I'm gonna drop the pan tomorrow after work, just didn't have time today after changing the fuel pump. I guess it could be a vacuum leak too, huh? I'll try and pull codes tomorrow after work too
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 18, 2006
#11
  • Apr 18, 2006
  • #11
HISSIN50 said:
Bill, I missed your first post - apologies for suggesting for him to search the forum - you already posted a link.
Click to expand...
no apology necessary,but thanks
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Apr 18, 2006
#12
  • Apr 18, 2006
  • #12
I had the same problem the other day. Started my car to come home from the grocery store and the damn thing just ran like crap, no reason why, was running right fine before. Well I looked under the hood and thought, hey, maybe it's the egr, because that always seems to make an engine run like complete crap if the vac lines aren't hooked up tight enough. Well sure enough, tighten those up and the whole problem went away. i would give your vac lines a quick runthrough and checking timing and all that junk just to get the basic things out of the way.
 
You must log in or register to reply here.

Similar threads

L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
379
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
734
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?