Yesterday had to jump car to get started..shut it off and would not restart. So I went to the auto store bought new battery which was due, replaced starter selenoid (spelling?), new positive cable, new negative cable, new starter selenoid to starter cable. All of these were well in need of replacing so I didn't mind putting out cash. Now problem is this I can hear the starter engage with a solid click and I can hear it try to trun but almost sounds like its binding..then try ignition again and same click, then it may turn a bit, or start. The click is not the selenoid, but is comming from the starter itself. The battery again is 2-3 HOURS OLD and checks out as good. My stock gauge only shows less than half, but again batter is good so I think gauge is squirrly. Please help with ideas if possible!!