As with everything we make... we are PROUD to say that these products are MADE IN THE USA!
Only 65 left and counting of the first 100 Classic Chin Spoilers!
If the factory 'chin' on your 2010 Mustang leaves a funny taste in your mouth, Classic Design Concepts 2010 Classic Chin Spoiler is the cure! This spoiler is production-molded in OEM TPO material (this is beyond urethane; this is what your facias are made of!) and is available in a textured black finish (as with the 05-09 Classic Chin) or a raw finish that will need paint. We spent a LOT of time immersed in CAD data to make sure the fit and finish are what you'd expect from CDC parts. This chin installs using all ORIGINAL mounting points; no modification to your car is required. This is as OEM-quality as it gets.
Incorporated into the either end of the center opening are brake cooling ducts, which can be made functional with our (soon to be released) brake duct cooling kit, or they can be filled with fog lights (another soon-to-be-released kit). I can't stress to you how cool this chin is!!
Also now available is the CDC 2010 Deck Lid Trim Panel! Our ALL NEW Decklid Trim Panel is designed and engineered to the same OE quality standards as our previous model. Made of OE-quality grained RIM material and fastened with 3M acrylic bonding tape, no permanent modification to your car is required. The panel is clean, classic, and easy to install. You'll find this among the most cost effective ways of dressing up the rear end of your 2010 Mustang!
Check out these and the rest of our 2010 products at the following link:
Classic Design Concepts 2010 Mustang
Questions? Email or call toll free! 866-624-7997.
Only 65 left and counting of the first 100 Classic Chin Spoilers!
If the factory 'chin' on your 2010 Mustang leaves a funny taste in your mouth, Classic Design Concepts 2010 Classic Chin Spoiler is the cure! This spoiler is production-molded in OEM TPO material (this is beyond urethane; this is what your facias are made of!) and is available in a textured black finish (as with the 05-09 Classic Chin) or a raw finish that will need paint. We spent a LOT of time immersed in CAD data to make sure the fit and finish are what you'd expect from CDC parts. This chin installs using all ORIGINAL mounting points; no modification to your car is required. This is as OEM-quality as it gets.
Incorporated into the either end of the center opening are brake cooling ducts, which can be made functional with our (soon to be released) brake duct cooling kit, or they can be filled with fog lights (another soon-to-be-released kit). I can't stress to you how cool this chin is!!
Also now available is the CDC 2010 Deck Lid Trim Panel! Our ALL NEW Decklid Trim Panel is designed and engineered to the same OE quality standards as our previous model. Made of OE-quality grained RIM material and fastened with 3M acrylic bonding tape, no permanent modification to your car is required. The panel is clean, classic, and easy to install. You'll find this among the most cost effective ways of dressing up the rear end of your 2010 Mustang!
Check out these and the rest of our 2010 products at the following link:
Classic Design Concepts 2010 Mustang
Questions? Email or call toll free! 866-624-7997.