• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

checking timing and got shocked?!

  • Thread starter Thread starter madspeed
  • Start date Start date Aug 12, 2010

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Aug 12, 2010
#1
  • Aug 12, 2010
  • #1
Well I was just checking the timing on my car and when I grabbed a hold of the distributor to make a small adjustment, I was pleasantly awakened by a nice jolt of electricity. Is it time for new plug wires??
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Aug 12, 2010
#2
  • Aug 12, 2010
  • #2
You hit the coil wire man... Don't hit the coil wire

Did that myself.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,296
18,002
224
Massachusetts
Aug 12, 2010
#3
  • Aug 12, 2010
  • #3
I'd say so.


I've been zapped when pulling wires off to check if a cylinder was dead. it HURTS!
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Aug 12, 2010
#4
  • Aug 12, 2010
  • #4
Does it mean its arcing and they need replaced??
 

Shaolin Crane

Banned
Oct 6, 2008
2,627
7
0
Kommiefornia
Aug 12, 2010
#5
  • Aug 12, 2010
  • #5
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Aug 12, 2010
#6
  • Aug 12, 2010
  • #6
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 12, 2010
#7
  • Aug 12, 2010
  • #7
Another possible factor: If you don't have your other hand resting on the radiator support (or other metal), it helps reduce the chance of a shock.
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Aug 12, 2010
#8
  • Aug 12, 2010
  • #8
I made sure not to touch any other metal parts!!!
 

1993SVT

New Member
May 25, 2010
29
0
1
Aug 12, 2010
#9
  • Aug 12, 2010
  • #9
You think that's fun? Try grabbing a live 220 wire by accident. That was life changing for me..lol. Yea, don't go grabbing a hold of all at the same time. Another possibility could be a cracked cap. The crack will be almost impossible to find, sometimes, but you'd get the same result when grabbing a cracked cap.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,296
18,002
224
Massachusetts
Aug 12, 2010
#10
  • Aug 12, 2010
  • #10
I was hit by 277v ac once. That one knocked me on my ass and prob took 5 years off my life
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Aug 13, 2010
#11
  • Aug 13, 2010
  • #11
A guy at work (and member here) was putting up a shelf in his garage when he hit the main power supply to his house with a drill bit

Shut down power in his neighborhood. Nobody understands how he survived but only his hand was fried.
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
154
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
M
Idle control problems
  • miser143
  • Aug 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
111
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 29, 2026
DadLife0724
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
402
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
220
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
382
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?