Clock wiring harness

9

95Mustang302

Member

Mar 30, 2005

302

0

16

May 21, 2005

#1

• May 21, 2005

• #1

I want to tap into this for my clock pod gauges but I need to know which wire is the 12v, the ground, and the one that turns the light in the clock on with the head lights. So if anyone has a schematic of the harness if they could post it up or list the wires and their purpose that would be GREAT!!!

Thanks a lot!

 

sociopath5.0

New Member

Jul 7, 2004

155

0

0

somewhere near Louisville, KY

May 21, 2005

#2

• May 21, 2005

• #2

I dont have a schematic, but if you have a voltage meter, you could find out which is which.

 

95BLKGT5.0

Founding Member

Mar 18, 2002

608

0

16

Auburn Washington

May 21, 2005

#3

• May 21, 2005

• #3

sociopath5.0 said:

I dont have a schematic, but if you have a voltage meter, you could find out which is which.

Click to expand...

You should not even be doing any wiring without a volt meter.
But when I get home I will look at how I did mine and then let you know.

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

May 21, 2005

#4

• May 21, 2005

• #4

u could use a test light also

 

9

95Mustang302

Member

Mar 30, 2005

302

0

16

May 21, 2005

#5

• May 21, 2005

• #5

I do have a voltmeter, I just did not know where it was at the time I posted because my dad was at work, and I had no idea where he put it

 

95BLKGT5.0

Founding Member

Mar 18, 2002

608

0

16

Auburn Washington

May 22, 2005

#6

• May 22, 2005

• #6

Ok here is how I did mine.
Black is ground.
I wired a red wire to fuse box for water temp power. And I ran a wire to the sendor thru the fire wall then up to the gauge.
The wires from the clock you need are:
1) A gray wire with red stripe it goes to the white wire on your gauge light
This is your light for the gauges and you will be able to dim them with your dash lights and you can use it for 2 gauges with a Y connection.

2) A gray wire with a purple stripe is the power wire for the oil pressure gauge. I ran another wire thru the fire wall for the oil sendor.