Car was converted from an auto to a manual. The pedal assembly came from a junk yard, installed by previous owner. He never did hook up the clutch switch. I got it hooked up, works fine except one thing... The switch itself is "floating" on the rod linked to the clutch pedal. There isn't sufficient travel to engage the switch. If I reach down and push the switch another 1/2" or so, it engages and the car starts fine. I'm pretty sure this switch should be fixed to something somewhere. Anyone have any pictures or suggestions so I know what needs to be done. I'm new to fox's, so I have no clue how this should look.