• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

compression test results

  • Thread starter Thread starter fiveOcalypsO
  • Start date Start date Feb 10, 2009
F

fiveOcalypsO

New Member
Aug 6, 2007
7
0
0
Feb 10, 2009
#1
  • Feb 10, 2009
  • #1
ok, i am going to try to explain this in as much detail as i can. i have a 1993 lx 5 liter mustang with 133,000 miles on it. i gave it a compression test this weekend and the highest number was 140 and my lowest was 130 with other numbers varying in between. i know this is ok because that is well within 25% i mean it's even inside of 10%. i did the testing on a warm engine and by taking every spark plug out one at a time and replacing it with the tester, i have since learned that i should have taken them all out. I know that there are lots of variables but i want to know if anyone can give me a rough estimate on how much of a difference i could get in my numbers if i would have taken all of the spark plugs out. oh and my battery wasn't fully charged either, i have a lot of problems with it, and i read that this can be a factor for compression test numbers as well. any ideas or information would help me out
 

7upstang91

10 Year Member
May 30, 2008
936
124
74
Florida
Feb 10, 2009
#2
  • Feb 10, 2009
  • #2
I'm not really sure. I thought that you were supposed to take them out one at a time. sorry.
 
F

fiveOcalypsO

New Member
Aug 6, 2007
7
0
0
Feb 10, 2009
#3
  • Feb 10, 2009
  • #3
ok well i guess i really don't care i just thought that 130-140 seemed kind of low, and i've been reading on here that most people don't care as long as they're within that certain percent, but i would like to know what a kind of compression numbers a brand new 5 liter would give so i can kind of compare it to mine. i do have a lot of miles, but i would just like to see where i'm at and what i should be worrying about.
 

Wallzy

New Member
Aug 20, 2006
128
0
0
Orlando, FL
Feb 11, 2009
#4
  • Feb 11, 2009
  • #4
I would say that your fine; not one cyl is conciderably low. I am under the impression that you have the stock camshaft in the car - which if you didn't may be another reason...but sometimes the cam timing or lifters may have an effect on cyl psi. For instance if your timing chain was lose/stretched over 133,000 miles the cam timing would be off - this would cause the cam to be retarded compared to where it is intended to be opened and closed. Another possibility is that your lifters are not remaining pumped up when the car is being turned over due to being worn. This can change the duration seen on the valve, reducing overlap but changing when IV & EV are opened and closed - ultimatly can effect the cyl psi. Hope that this helps,

Walz
 

7upstang91

10 Year Member
May 30, 2008
936
124
74
Florida
Feb 11, 2009
#5
  • Feb 11, 2009
  • #5
I have heard that you want to be 130-150. You are right there I wouldn't worry at all.
 
F

fiveOcalypsO

New Member
Aug 6, 2007
7
0
0
Feb 11, 2009
#6
  • Feb 11, 2009
  • #6
thanks guys
 
You must log in or register to reply here.

Similar threads

D
Engine Questions on compression test results
  • dqureshi06
  • Jan 6, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
569
Fox 5.0 Mustang Tech Jan 7, 2025
Noobz347
M
Misfire
  • Mike3
  • May 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
143
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2026
Mike3
M
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
682
SN95 V6 Mustang Tech Sep 29, 2026
gkomo
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
583
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
475
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?