• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Distributor????????

  • Thread starter Thread starter from6to8
  • Start date Start date Jan 7, 2014

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,905
144
94
Jan 7, 2014
#1
  • Jan 7, 2014
  • #1
Well this morning I had to drive the car to work because of a situation with my truck
Anyway I started the car up and let it warm up for about 5 minutes then when i went outside to leave the engine light was on and the temp on the guage was still at 100. I turned the heater on high and let it warm up about 3 more minutes ( 17 degrees outside). When i got in the car and begin to move, the engine light went off and the guage started to move. There was coolant in the jug and radiator was full. I also noticed from home till my drive at work the miss was back. Went away pretty much with the exception of just a slight miss after I set the timing last nite after noticing how far advance it was.

So I'm thinking that maybe the timing has advanced again and I'm hoping its the distributor just needs to be changed. Thats an easy fix. I just put a timing chain on the car last yr or yr before last and made sure the gears were lined up correctly and everything. I will recheck the timing when I get off today and if it is advanced again is there a way to tell if the dizzy is going out? I know to check the teeth the gear and last time I took out when changed the intake gaskets they appeared ok to me. But hopefully that's all it is though as I will just get a new dizzy. I will probably just go with a reman from Autozone or Oreilly. If that's the case I would be able to use that even for a future motor possibly a bigger motor?
 
D

Deleted member 38176

Jan 7, 2014
#2
  • Jan 7, 2014
  • #2
You might get better results in the 5.0 sections
 
You must log in or register to reply here.

Similar threads

Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
589
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
294
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
B
Help! Fox with idle issues
  • bbarton
  • Sep 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
252
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 12, 2026
AeroCoupe
M
2001 cobra ignition timing off
  • Mike3
  • Jul 13, 2026
  • SVT Tech Forum
Replies
9
Views
334
SVT Tech Forum Aug 2, 2026
Mike3
M
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
157
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?