I got all my stuff from MM...the transmission will be here the middle of this month...and I need more stuff.
I want to install my driveshaft loop,
Magnaflow mufflers, 3in. high flow cat, exhaust hangers, and coilovers while I'm under it. I need to be able to set the ride height because of the dip at the bottom of my driveway. The driveway is a hill and the bumper just barely scrapes. The cobra front lip will bring it down another inch or so.
I want to put UPR coilovers with 175lb 14" springs on him. They are cheap but should work for what I need right now.
I also need to replace my cobra brake caliper brackets up front. They have little dips in them where the pads ride. I'd feel better with new ones ( cheap from Rockauto ).
During the winter I plan to tackle the bodywork and get the car in, at least, primer sealer.
@Davedacarpainter , what filler would you recommend ? I used Bondo Gold on a previous car but it seemed like it shrank over a couple years causing waves. My doors are really wavy and will take some skimming to get straight. Really don't want to replace them since they aren't rusty....just dinged and some waves.