Dyno : Pics and vid

JonJon · Apr 17, 2004

CottonBurnerz guessed 255 and went over... but he said 'ish' so he wins.

The numbers are SAE.
254.58 rwhp
284.03 rwtq
I was hoping for atleast 260rwhp but oh well. My SES light came on literally as I pulled onto the dyno and when I got the codes pulled yesterday, it reported lean on bank 1 and bank 2. A/F reading looks really good though (said the owner of dyno)

Vids:
4.1 megs, DivX 5 (divx.com codec)
http://coldgravity.com/mustang/dyno/JonJonDyno.avi

9.8 megs, MPEG2
http://coldgravity.com/mustang/dyno/JonJonDyno.mpg
I'm still not sure the best way to encode a vid for mass viewing
There's a 1 second break in the footage when the guy I asked to film probably hit the stop button by accident while trying to zoom. My friend showed up late

and OMFG. There was a Cobra R there!!!! Not dynoing, just there to make us drool all over the car!!!

The owner used to have a 440rwhp 03 Cobra but decided it was too common so he found this 365rwhp beast.

I thought this pic was funny, I knew it didn't have sound deadening material but the trunk was totally bare. and the rear seat is just cloth with velcro fastening.

edited with vid links.

Beau · Apr 17, 2004

i am glad i wasn't right nice numbers

neoclasiccl · Apr 17, 2004

damn I was close

Nice numbers man

JonJon · Apr 17, 2004

A/F is good?

neoclasiccl · Apr 17, 2004

JonJon said:
A/F is good?

since your N/A your airfuel is fine.

JonJon · Apr 17, 2004

neoclasiccl said:
since your N/A your airfuel is fine.

Thanks. I didn't get to try the Pro-M Optimizer, my friend didn't arrive with his multimeter before my pulls. Plus, after the first pull when he said the A/F looked good I didn't worry so much.

Stupid SES light, probably fouled O2 sensors

JonJon · Apr 17, 2004

Isn't the torque all sorts of low? Isn't stock like 275rwtq?

Solid Snake · Apr 17, 2004

Wheres the vid?

03gtmustang · Apr 17, 2004

I just installed my C&L Plenum with the Accufab 75mm T/B and my light came on. I ran the codes with my superchip programmer and it came out to be lean in bank 1 and 2 also.

SANZ · Apr 17, 2004

Nice numbers

Dan_Soprano · Apr 17, 2004

I was there with my club Street Stangs of Maine. I had the laser red GT Vert with the Kenne Bell. My numbers sucked too. I'll start my own thread though.

JonJon · Apr 17, 2004

Solid Snake said:
Wheres the vid?

4.1 megs, DivX 5 (divx.com codec)
http://coldgravity.com/mustang/dyno/JonJonDyno.avi

9.8 megs, MPEG2
http://coldgravity.com/mustang/dyno/JonJonDyno.mpg

I'm still not sure the best way to encode a vid for mass viewing

03gtmustang said:
I just installed my C&L Plenum with the Accufab 75mm T/B and my light came on. I ran the codes with my superchip programmer and it came out to be lean in bank 1 and 2 also.

I didn't get a SES until I installed the Densecharger TB pipe... since then I've had a SES 3x... But it must be an O2 sensor if my A/F is fine right?

JonJon · Apr 17, 2004

Dan_Soprano said:
I was there with my club Street Stangs of Maine. I had the laser red GT Vert with the Kenne Bell. My numbers sucked too. I'll start my own thread though.

I was in the back of the chain of Stangs on the way back... you were in the very front.

I'd love to have your numbers, even if you're not happy Your car is pretty awesome, chrome
I have your runs on film, I can encode them if you'd like.

I had the slowest car there

Dan_Soprano · Apr 17, 2004

JonJon said:
I was in the back of the chain of Stangs on the way back... you were in the very front.

I'd love to have your numbers, even if you're not happy Your car is pretty awesome, chrome
I have your runs on film, I can encode them if you'd like.

I had the slowest car there

Yeah bro, i'd love to have the vid!! You can email it to me at bulldoze94@aol.com. thanks!!

DeadLurker · Apr 17, 2004

Why did you rev it to 5,400rpms only? Is that where you shift?

JonJon · Apr 17, 2004

DeadLurker said:
Why did you rev it to 5,400rpms only? Is that where you shift?

Stupid Ford and stupid stock 16" rims... STUPID LIMITER!!

and I totally forgot about that when I heard the #'s... but it looks like it's flattening/dropping anyways.

DeadLurker · Apr 17, 2004

JonJon said:
Stupid Ford and stupid stock 16" rims... STUPID LIMITER!!

Your rev limitor is set at 5,400rpms????

Beau · Apr 17, 2004

JonJon said:
Stupid Ford and stupid stock 16" rims... STUPID LIMITER!!

so you got the bare bones version of the GT?

JonJon · Apr 17, 2004

DeadLurker said:
Your rev limitor is set at 5,400rpms????

in 4th it cuts off around 120-125mph.

1990StangLX said:
so you got the bare bones version of the GT?

I think the deluxe came with 16" too. I think only the premium and 35th packages came with 17"...
not positive.

99 and 00 16" rims

Dan_Soprano · Apr 17, 2004

Any luck with the vid of my 3rd run yet?

Dyno : Pics and vid

JonJon

Beau

neoclasiccl

JonJon

neoclasiccl

JonJon

JonJon

Solid Snake

Banned

03gtmustang

New Member

SANZ

New Member

Dan_Soprano

JonJon

JonJon

Dan_Soprano

DeadLurker

Daily Driven

JonJon

DeadLurker

Daily Driven

Beau

JonJon

Dan_Soprano

Dyno : Pics and vid

Banned

New Member

New Member

Daily Driven

Daily Driven

Privacy & Transparency

Privacy & Transparency