• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electrical Problems - Where to look

  • Thread starter Thread starter Aaron
  • Start date Start date Aug 17, 2005

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Aug 17, 2005
#1
  • Aug 17, 2005
  • #1
A few weeks ago, I noticed that my car stereo kept turning off and back on by itself. At the time, I figured there was a problem with the head unit, and I decided to buy a new one (both old unit and new unit are Kenwood head units). Well, I finally installed the unit yesterday, and after the install was done, decided to take the car for a quick spin around the block. While driving, it did it again - this time with the new stereo! Now since it's happening with both head units, I knew there was something else going on, so I took the stereo out and ran my own power and memory wire to the fuse box, and ran a new ground line. That didn't help either. Well today I had the car out again and it's still doing it. While the radio was mysteriously turned off, I went to roll up my window (power windows), and my window wouldn't go up! Neither would the other side. However, when the radio turned back on, my window switches worked again. Now I know I have a fairly big problem on my hands.
Where should I even start with this? The whole car doesn't die because turn signals and lights work. Power locks work too. There is an alarm installed (professional install), and my head unit is in there, but that's about it.
Any help would be GREATLY appreciated. If I need to post more info, let me know.
Hopefully someone out there knows where to start!
 
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Aug 17, 2005
#2
  • Aug 17, 2005
  • #2
i just ripped out my 89 dash harness... and let me tell you the first time you do it (if you decided too) it is a real p.i.t.a. took me almost 6 hrs to get the thing out so many bolts and stuff. you can spend hours even days trying to find the problem and never find it. you might get lucky. i just decided to pull the dash off, swap wire with USED replacement. notice i said used cause they don't make new DASH harness replacements anywhere.. engine harnesses they do but not dash. not even painless wiring makes them. just remember 87-89 5.0 is identical dash harness. 90-93 5.0 is different due to air bags and air bag module and bunch other stuff. harnesses from 4bangers don't work. my prob was i have 89 and bought 90 harness installed and now i have to buy a different speedo, cause connectors are diff.
 
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Aug 17, 2005
#3
  • Aug 17, 2005
  • #3
try swapping computer first before searching wire leads. electrical gremlins can take a eternity to find. also autozone scans your car for free, they didn't find anything on mine. but worth a shot
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Aug 18, 2005
#4
  • Aug 18, 2005
  • #4
I would start at the ignition switch. They are known to go bad and affect the systems that you mention. Sometimes they give you a heads up and you can jiggle them and get them to work for a while.

I don't like throwing parts at problems, but in this case, because it's cheap, it may be more efficient to just shotgun the switch (after checking for the obvious loose/faulty connections at the switch) and eliminate it right away.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 18, 2005
#5
  • Aug 18, 2005
  • #5
Saleen might be onto something. Also, you did not mention where you sourced your new power from (for the stereo constant-power and switched-power).

Look at commonalities between affected circuits (like a common fusible link off the solenoid, etc).

Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 18, 2005
#6
  • Aug 18, 2005
  • #6
Another vote for a bad ignition switch.

There is a FREE recall on Ford ignition switches. They overheat and sometimes catch fire.

Copy down you VIN number and call the Ford dealer nearest you. Tell them you want to see if the ignition switch recall for Fords & Mustangs was done on your car. They will ask for the VIN number & check it against the master database. If it isn't in the datbase, then you can schedule an appointment to have the switch replaced for free. The TSB is #95S28, and don't let them tell you that they don't do that anymore...
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Aug 18, 2005
#7
  • Aug 18, 2005
  • #7
Thanks everybody for the info. Looks like I will check it out this weekend.

jrichker - isn't there some sort of limitation on getting recalled vehicles fixed? I'm just wondering what the dealership can throw at me. It's going to sound pretty funny to call a Ford dealership on a warranty/recall notice for an 87 Mustang...
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Aug 18, 2005
#8
  • Aug 18, 2005
  • #8
According to the NHTSA, manufacturers are obligated to perform free repairs for 10 years from the time of the iniital recall. You can still call your dealer and check on the recall status of your car. They may give you a goodwill repair.
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Aug 19, 2005
#9
  • Aug 19, 2005
  • #9
Update...You're gonna laugh!

Well 1st off, I would like to thank everyone who mentioned the ignition switch as the culprit. It was the switch...well sort of.

I took off the cover around the steering column to see if I could find a particular wire that was at fault by doing the basic "wiggle" test. When I went to look at the switch and wire harness, all I could see was a bunch of ELECTRICAL TAPE wrapped around it! That's right - it looks like the last "owner" broke off the tabs which hold the wire harness to the switch itself and thought taping it back up would solve the problem. Well of course the tape is gonna stretch out and pull away from the switch!!! IDIOT people... Well for now, I had to follow the previous moron's lead and re-tape it up. I'm not sure what to do about permanent mounting because like I said, the clips are broken off the wire harness, and I'm not sure if I could even find a new one...unless I go through the area junkyards for one and solder the replacement one to my existing wiring. Anyway - I'm surprised the tape job lasted this long!!! I've owned the car for 3 years, so it's been at least that long...probably more. I wonder what other surprises my car's gonna bring...

Once again, thanks to the people who helped out. You are what make this site GREAT!
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Aug 19, 2005
#10
  • Aug 19, 2005
  • #10
Ignition switch repair harnesses used to be available they still may be or you could get one from a junkyard like you mentioned, maybe a Ford dealer. In most cases with connectors you can extract the terminals and just remove the shell (they're held in by hook catches). If your existing wiring is in good condition you should be able to just replace the shell and not mess with a cut and splice job. Just take note of the positon of the wiring or do a one for one extract/replace job.

Glad to hear you've isolated the problem.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Aug 20, 2005
#11
  • Aug 20, 2005
  • #11
aaron11272 said:
Well 1st off, I would like to thank everyone who mentioned the ignition switch as the culprit. It was the switch...well sort of.

That's right - it looks like the last "owner" broke off the tabs which hold the wire harness to the switch itself and thought taping it back up would solve the problem. Well of course the tape is gonna stretch out and pull away from the switch!!!
Click to expand...
Should have used Duct Tape lol

aaron11272 said:
IDIOT people... Well for now, I had to follow the previous moron's lead and re-tape it up. I'm not sure what to do about permanent mounting because like I said, the clips are broken off the wire harness, and I'm not sure if I could even find a new one...unless I go through the area junkyards for one and solder the replacement one to my existing wiring.
Click to expand...
They probably didn't know what to do either, which is why they taped it. Not trying to make excuses; that sucks man.

aaron11272 said:
Anyway - I'm surprised the tape job lasted this long!!! I've owned the car for 3 years, so it's been at least that long...probably more. I wonder what other surprises my car's gonna bring...
Click to expand...

I'd go w/ Saleen's advice and try to see if you can find a plastic connector part and just transfer wires. Cutting and splicing sucks.

I'm trying to think of an alternative method to the tape besides replacing the plug, but I can't think of anything that's efficient, economical and relatively easy. You could maybe come up w/ something if you get creative, if you can't find a new or used plastic connector/plug.

Good Luck
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Aug 20, 2005
#12
  • Aug 20, 2005
  • #12
HISSIN50 said:
Saleen might be onto something. Also, you did not mention where you sourced your new power from (for the stereo constant-power and switched-power).

Look at commonalities between affected circuits (like a common fusible link off the solenoid, etc).

Good luck.
Click to expand...
I agree. Where did you source power.....
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Aug 20, 2005
#13
  • Aug 20, 2005
  • #13
ss93cobra said:
I agree. Where did you source power.....
Click to expand...

After I was having problems with the factory wiring, I ended up going directly to 2 unused areas in the fuse box. One happened to be constant power, and 1 turned on and off with the ignition. Re-taping the harness solved the problem...temporarily.
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Aug 20, 2005
#14
  • Aug 20, 2005
  • #14
TheUser said:
I'm trying to think of an alternative method to the tape besides replacing the plug, but I can't think of anything that's efficient, economical and relatively easy. You could maybe come up w/ something if you get creative, if you can't find a new or used plastic connector/plug.

Good Luck
Click to expand...

This may sound kind of funny, but I'm thinking of using plastic zip-strips to hold the harness in place until I get a new harness. That will hold forever, but I still want to fix it right.

TheUser said:
I'd go w/ Saleen's advice and try to see if you can find a plastic connector part and just transfer wires. Cutting and splicing sucks.
Click to expand...

How easy is it to pull wires out of a wiring harness? I've never done this before. I know there are just pins in there, but what do I need to do to get them out?
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Aug 20, 2005
#15
  • Aug 20, 2005
  • #15
Zip ties will work for the interim, but even they degrade and get brittle and eventually break.

It's a simple task to extract the terminals from a shell. I haven't done an ignition switch connector, but it's probably similar to the headlight switch connector. If you have to, cut one out of a junkyard harness and take a look before starting the job. You need something like a jeweler's screwdriver or a pick to depress and release the catches that hold the terminals in the shell. At the same time you just pull the wires out the back of the shell. The terminals then just snap into the new shell.

Once you've figured out how the thing is assembled it probably won't take more than 10-15 minutes to perform the switch.
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
235
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
202
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
841
Fox 5.0 Mustang Tech Jul 21, 2026
gvanginkel403
G
For Sale 2006 Mustang GT Shaker 500 Head Unit with Bracket
  • lenko
  • Sep 3, 2026
  • Other Classifieds
Replies
0
Views
162
Other Classifieds Sep 3, 2026
lenko
For Sale 2006 Mustang GT Steering Wheel with Cruise Controls
  • lenko
  • Sep 3, 2026
  • Other Classifieds
Replies
0
Views
137
Other Classifieds Sep 3, 2026
lenko
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?