• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Engine buildup advice

  • Thread starter Thread starter lightblade
  • Start date Start date Dec 31, 2007

lightblade

Member
Aug 7, 2004
366
0
17
Dec 31, 2007
#1
  • Dec 31, 2007
  • #1
So I'm building up the engine for a power adder(700-800rwhp) later and this is what i have bought so far:
Manley h-beam rods with arp hardware, diamond pistons, steel cobra crank, fel-pro head gaskets, arp head studs, dual gt40 fuel pumps, 62lb injectors.

I want to do a fuel rail kit but not sure which one to go with. Also thinking about new motor mounts since i will have the engine out. Any experience with these?

Also is there anything im missing or that you guys recommend?(already have plans for gauges, and clutch)

Thanks!
 

psfracer

Member
Dec 30, 2007
35
0
6
Valencia, CA
Dec 31, 2007
#2
  • Dec 31, 2007
  • #2
Don't forget the rest of the drivetrain---what transmission are you going with? Rear suspension?

As far as the engine, what kind of boost are you looking at to get to 800rwhp? Supercharger, turbo, other? From what I have seen, on any supercharger your looking at around 25psi. When you go that high, the head gasket is the weak link. Get the best race head gasket you can get. Diamond/CP/JE pistons are great choices in my opinion, a good h beam rod, cobra crank. The fuel system your going with is good, but I am not sure if 62lb injectors are going to do it for 800rwhp. I have 60lb injectors and closing in on 600rwhp----but 200 more is alot.

Lastly, 800rwhp is good for low 9 second ets. Is that what you want? If you were to race that at the track, are you aware of all of the safety equipment you would need (in order to race legally, that is)? Just some thoughts.
 

lightblade

Member
Aug 7, 2004
366
0
17
Dec 31, 2007
#3
  • Dec 31, 2007
  • #3
No more than 20lbs of boost so wherever than gets me def dont want more than 800rwhp. Im thinking i will be around 650-750rwhp which is fine. Not really going for a track car. Most likely going with the procharger F1a. Whats the limit of the stock transmission? Thanks for the help.
 

psfracer

Member
Dec 30, 2007
35
0
6
Valencia, CA
Dec 31, 2007
#4
  • Dec 31, 2007
  • #4
I have no first hand experience with the limits of the stock manual trans and clutch. My experience is with the auto. Possibly someone else can jump in and help you out with that.

I know with the 3.4 whipple, a friend of mine has already dyno'd at 719rwhp with 20psi. You will be in good hands with the F1A as far as power, not sure about street manners though. My friend with the 3.4 whipple drives it everywhere.
 

whyask

New Member
Apr 4, 2005
735
1
0
Sacramento
Dec 31, 2007
#5
  • Dec 31, 2007
  • #5
Hey do you have a video of your buddys car, Just for refernce !
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
871
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
645
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
For Sale Ford 331 stroker engine for sale - with options!
  • TTSaleen
  • Jul 1, 2026
  • Engine and Power Adder
Replies
6
Views
238
Engine and Power Adder Jul 2, 2026
Noobz347
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
801
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
497
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?